Philips HD8857, HD8855 user manual OK Fill Tank with Descaling Solution

62ENGLISH

OK FILL TANK WITH

DESCALING SOLUTION

4Remove the water tank, and if installed, remove the INTENZA+ water filter. Pour the entire content of the Saeco decalcifier.

Then fill the water tank with fresh water up to the MAX level. Press the “OK” button.

OK

EMPTY TRAY UNDER

BREW GROUP

OKFILL HALF CARAFE

WITH WATER. INSERT

IN BREW. POSITION

OK

PLACE A CONTAINER

UNDER HOT WATER &

CARAFE DISP SPOUT

STEP 1/2 DESCALING

PAUSE

OK	RINSE TANK &
	FILL WITH WATER

5Empty the (internal) / (external) drip tray. Press the “OK” button.

6Fill half the milk carafe with fresh water. Insert the carafe and open the milk dispenser by turning it clockwise. Press the “OK” button.

7Place a large container (1,5 lt) under the hot water/steam wand and milk dispenser spout of the carafe. Press the “OK” button.

8The machine will start dispensing the descaling solution at intervals. The bar on the display shows the cycle progress.

Note:

To empty the container during the process, the descaling cycle may be paused by pressing the “ESC” button. To resume the cycle, press the “OK” button.

9The message indicates the end of the first step. The water tank needs to be rinsed. Fill the water tank with fresh water up to the MAX level. Press the “OK” button.