Philips HD8857, HD8855 user manual Energy Saving, Stand-by, Screen saver

70ENGLISH

ENERGY SAVING

Stand-by

The Saeco full automatic espresso machine is designed for energy saving- proven by the Class A energy label.

After a certain time of inactivity that can be programmed individually (see chapter “Machine Programming”), the machine turns off automatically. If a product has been brewed, the machine performs a rinsing cycle.

In stand-by mode, the energy consumption is below 1Wh.

To turn on the machine, press “” button (if power button on the back of the machine is set to “I”). If the boiler is cold the machine performs a rinsing cycle.

The machine status can be manually changed to stand-by mode by hol- ding the STAND-BY button for 3 seconds.

Note:

1The stand-by mode cannot be activated if the service door is left open.

2When the stand-by mode is activated, the machine may perform a rinse cycle. The cycle can be interrupted by pressing the “STOP” button.

The machine can be turned on again by

1pressing any of the control panel buttons.

2opening the service door (when closing the door the machine goes back to standby mode).

The red light on the “” button flashes when the machine is in stand-by mode.

Screen saver

The machine comes with a screen saver to extend the life of the display. After 5 minutes of inactivity, the machine logo will start floating.

In this condition, the machine is active and pressing any button will imme- diately activate all functions.

Note:

The screen saver is not activated if a warning signal is active.