Philips HD8857, HD8855 user manual Machine takes a

68ENGLISH

Machine actions

Causes

Solutions

The machine takes a	The machine circuit is clogged by	Descale the machine.
long time to warm up or	limescale.
the amount of water dis-
pensed from the wand is
too little.
The brew group cannot	The brew group is out of place.	Turn the machine on. Close the ser-
be removed.		vice door. The brew group automati-
		cally returns to the initial position.
	The coffee grounds drawer is	Remove the coffee grounds drawer
	inserted.	before removing the brew group.
The brew group cannot be	The brew group is not in rest	Ensure that the brew group is in
inserted.	position.	rest position. Both arrows must look
		towards each other. Please refer to
		chapter “Monthly Lubrication of the
		Brew Group” how to do that.
	Gear is not in initial position.	Insert the drip tray with the coffee
		grounds drawer and then close the
		service door. Turn the machine on. The
		gear automatically returns to the initial
		position so the brew group can be
		inserted.
There is a lot of coffee	The coffee you are using may not	It may be necessary to change the type
ground under or on the	be suitable for automatic machi-	of coffee or the coffee grinder settings
brew group.	nes.	(please refer to chapter “Adjusting the
		ceraminc coffee grinder”).
	The machine is adjusting the	The machine automatically adjusts
	grinder due to new coffee beans or	itself after brewing several cups of
	pre-ground coffee.	coffee to optimize the extraction of
		the coffee to the compactness of the
		ground coffee.
		It may take toup to 2-3 products until
		the grinder is adjusted.
		This is not a failure of your machine.
The machine produces	The grinder needs to be adjusted.	By adjusting the ceramic coffee grinder,
coffee grounds that are		the quality of the puck can be adjusted.
either too wet or too dry.		When the pucks are too wet, make the
		grind coarser.
		When the pucks are too dry, make the
		grind finer.
		Please refer to chapter “Adjusting the
		Ceramic Coffee Grinder”.