OK
EMPTY TRAY UNDER
BREW GROUP
ENGLISH 63
Empty the (internal) drip tray and place it back. Then, press the “OK” button.
OKFILL HALF CARAFE |
WITH WATER. INSERT |
IN BREW. POSITION |
OK |
PLACE A CONTAINER |
UNDER HOT WATER & |
CARAFE DISP SPOUT |
STEP 2/2 RINSING |
PAUSE |
Empty the milk carafe and fill it with fresh water. Insert it back in the machine. Press the “OK” button.
Empty the container and place it back under the hot water/steam wand and milk dispensing spout of the carafe. Press the “OK” button.
The rinsing cycle is activated. The bar shows the cycle progress.
When the amount of water needed for the rinse cycle has been completely dispensed, the machine automatically ends the descaling process by showing this display after a short heating up phase.
Remove and empty the container.
Disassemble and wash the milk carafe as described in the “Weekly cleaning of the milk carafe” chapter.
Empty the (internal) drip tray and place it back.
Place back the “INTENZA+” water filter into the water tank if it was installed.