INSTALLATION INSTRUCTIONS
Tools and Parts
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed here.
Install Overlay Hooks
Using a Phillips screwdriver and eight
■Hand drill or electric drill (properly grounded)
■¹⁄₂" Brad point doweling drill bit
■Phillips screwdriver
PARTS NEEDED:
■Scissors
■Masking tape
■Tape measure
■Petroleum jelly
A
Custom Overlay
Hardware (Optional)
PARTS SUPPLIED:
■ | ■ | Overlay plates (2) | |
■ | ■ | Overlay hooks (4) |
Custom Overlay Frame
If you plan to install a custom overlay frame, you will need to create the frame yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for frame specifications.
IMPORTANT:
■The thickness of the overlay frame must be ³⁄₄" (1.91 cm).
■Overlay frame must not weigh more than 10 lbs (4.54 kg).
■Overlay frames weighing more than recommended may cause damage to your appliance.
Overlay Frame Dimensions—Rear View
Create the custom overlay frame using the dimensions shown.
3³⁄₄" (9.53 cm)
1⁵⁄₁₆" |
|
|
|
| ||
4¹³⁄₃₂" | ||||||
| ||||||
(3.33 cm) |
|
|
| (11.2 cm) | ||
|
| |||||
|
|
| 29⁷⁄₈" |
A | 1³⁄₄" | (75.88 cm) |
(4.45 cm) |
| |
|
|
1⁵⁄₁₆" 2¹⁄₂" (3.33 cm)
(6.4 cm)
23³⁄₄"
(60.33 cm)
A. Overlay hook locations
A. Overlay hooks (4)
Door Hinge Holes
■The views of the top and bottom hinge pin hole show a right- hand hinge. Mirror the image for a
■We recommend using a
1.Using a ¹⁄₂" Brad point doweling drill bit, drill a ¹⁄₂" (1.27 cm) deep hole into the top of the overlay frame for the top hinge pin as shown.
Top View
|
| ¹⁄₂" |
| A | (1.2 cm) |
|
| |
|
| Front Surface |
¹⁷⁄₃₂" |
|
|
(1.35 mm) |
| Back Surface |
|
| |
|
| A. Radius 5.0 |
4