Hotpoint CH 10450 GF S Conversion for use on Butane or Propane, Space for fixing, Cooker hoods

Page 6

 

Conversion for use on Butane or Propane

GB

Each hob burner requires the injector to be replaced and

 

each burner gas tap to have the by-pass screw adjusted

 

 

according to the following procedure:

 

1.

Lift off the burner cap and the burner body and place it

 

 

to one side.

 

2.

Remove the injector from the burner base with a suitable

 

 

box spanner and discard.

 

3.

Replace the injector with the appropriate replacement

 

 

(see Table).

 

4.

Repeat for each burner.

 

5.

Replace the burner bodies and caps, taking care that

 

 

they are positioned correctly.

 

6.

Remove the tap knob from the left hand hotplate tap.

 

 

Insert a narrow flat screwdriver centre of the tap spindle

 

 

and turn fully clockwise. Replace the tap knob. Repeat

 

 

this procedure with the other six hotplate taps.

 

7.

Position and fix the self-adhesive LPG conversion label

 

 

over the gas details on the rating plate label.

Space for fixing

The cooker can be close fitted below hotplate level. This requires a minimum distance of 600mm between cupboard units of hotplate height.

When installing next to a tall cupboard, partition or wall, for a minimum distance of 400mm above hotplate level, allow a side clearance of at least 65mm.

The diagram below illustrates the minimum clearance between the cooker and adjacent walls, cupboards etc.

The wall behind the cooker, 50mm below and 450mm above, and the width of the cooker, must be a non- combustible material such as ceramic wall tiles.

If the cooker is to be fitted close to a corner on the left hand side, ensure that there is a clearance of at least 50mm to allow the main oven door to open fully for when removing oven shelves.

Cooker hoods

If a cooker hood is to be installed, refer to the cooker hood manufacturers’ instructions regarding fixing height.

UNPACKING THE COOKER

Unpack the components from inside the grill and oven. Check that the following parts are present:

Meat pan

Pan supports (3)

Grill pan, grid and handle

LPG conversion kit

Loose burner parts (14)

Oven shelves (4)

Aluminium burner bodies (6)

Griddle

Wok Stand

Literature pack

After unpacking your cooker, make sure that you remove all the packing from the oven and grill, and any stickers from the oven door and the hob.

Levelling

Your cooker is heavy, so it would be advisable for two people to move it. The cooker is fitted with rear wheels and will slide into position easily. Movement of your cooker is most easily achieved as follows. Open the grill/oven door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill or oven interior furniture, and then lift and slide back at the same time.

Your cooker must stand on a flat surface so that the hob is perfectly level, and the cooker is stable and cannot be rocked, this is easily achieved by adjusting the three feet which are under the front of the cooker and the 3 castors under the rear of the cooker, if necessary.

NOTE: If the cooker is to be placed on a base, precautions must be taken to prevent it from slipping off the base. The cooker is designed to match the depth of standard 600mm worktops. An adaptor backplate should, therefore, be fitted within the shaded area shown to allow the cooker to be pushed fully to the wall. If a forward facing backplate is used, it must be chased into the wall.

180

450

 

370

750

750

 

250

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operating Instructions CH 10450 GF S CH 10455 GF S CH 10456 GF SGB Warnings Overall view 12TIMER 13THERMOSTAT and Control KnobDescription of the appliance Control panelInstallation GB IntroductionEnergy Cooker hoods Conversion for use on Butane or PropaneSpace for fixing LevellingAlways Installation & Operational ChecksPlease read the precautions below before using your cooker AlwaysNever NeverSetting the time of day Oven timer operationTimer function buttons Automatic cookingSetting the minute minder Auto cooking programmesTo change the time of day repeat Steps 4, 5 & 6 above Other notes on timer operation HotplateTo USE the Hotplate Griddle Safety requirements for deep fat fryingHow to deal with a fat fire Use of the griddleSome recipe ideas for your griddle When cool, butter and serveUsing the grill pan kit Top grillTemperature and Time To Prepare Meat and Poultry for Roasting in Your FAN OvenFrozen Meat and Poultry Conventional Oven Times and Temperatures for RoastingConventional oven 2nd Oven Oven ControlFan Oven Fan Oven Cooking FoodConventional Oven Cooking Food Warming compartment GB The ‘slow cook’ settingCare and cleaning Preparing Food for Slow CookingReplacement of oven light bulb ‘Heat clean’ linersCleaning the griddle plate Disposal of your productProblem Check GB Somethingcooker wrong with yourPage Parts and Accessories GB After Sales ServiceHotpoint Service Essential Contact InformationFree Helpdesk Service Year Parts GuaranteeExtended Guarantees 08448 24 24 24 Republic of Ireland 01 230195104111.01

CG 10455 GF S, CG 40456 GF S, CH 10450 GF S specifications

The Hotpoint CH 10450 GF S, CG 40456 GF S, and CG 10455 GF S are three high-performance cooking appliances that exemplify contemporary kitchen design and functionality. Each model brings a unique set of features and technologies aimed at enhancing the cooking experience while ensuring reliability and efficiency.

One of the primary features of the Hotpoint CH 10450 GF S is its gas cooking capability, which provides rapid heat and precise temperature control. This model includes a powerful burner system with multiple burner types, allowing cooks to select the ideal flame size for different dishes, from simmering sauces to searing meats. The easy-to-clean stainless steel surface not only enhances the look of your kitchen but also ensures a straightforward maintenance process.

The CG 40456 GF S stands out with its even cooking features, incorporating a multi-zone burner setup that distributes heat evenly across the cooking surface. This model features a large oven capacity, making it suitable for families or those who enjoy entertaining guests. With its advanced thermostat technology, it ensures that your meals cook evenly, reducing hot spots and preventing overcooking.

On the other hand, the CG 10455 GF S focuses on versatility and convenience. It integrates a range of cooking modes, which include fan-assisted cooking and traditional roasting options. This model is designed for users who seek efficiency, as it minimizes cooking times while maintaining food quality. Additionally, it comes with programmable settings, heightening user experience by allowing them to pre-set cooking times and temperatures, ideal for busy households.

All three models are equipped with safety features, such as flame supervision devices that automatically cut off the gas supply if the flame goes out. Moreover, their energy efficiency ratings contribute to a reduced environmental footprint and lower energy costs.

In summary, the Hotpoint CH 10450 GF S, CG 40456 GF S, and CG 10455 GF S are designed to meet the demands of modern kitchens. They combine innovative technologies, user-friendly features, and a commitment to safety and efficiency, making them ideal choices for both aspiring and seasoned home chefs. Their elegant designs and robust performance capabilities ensure they not only function well but also complement a contemporary kitchen aesthetic.
Top Page Image Contents