Hotpoint CG 40456 GF S, CH 10450 GF S, CG 10455 GF S Installation & Operational Checks, Always

Page 7

Connection to the cooker should be made with an approved appliance flexible connection in according to current National legislation. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

The temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70°C.

LPG cookers should be connected with a hose suitable for LPG and capable of withstanding 50mbar pressure.

WARNING - THIS APPLIANCE MUST BE EARTHED Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, which is stated on the data badge fitted on the rear panel.

The cooker must be connected by a contractor/engineer who is registered with the National Inspection Council for Electrical Installation Contracting (NICEIC), to a suitable double - pole control unit with a minimum rating of 30A and a minimum contact clearance of 3mm, which should be fitted adjacent to (but not above) the cooker, in accordance with IEE regulations.

The power supply cable should conform to Current national legislation with a conductor size of 4mm2.

The power supply cable must be type H05RR-F 3x4mm².

The control unit should be easily accessible in the event of an emergency.

This appliance conforms to EN55014 regarding suppression of radio and television interference.

Access to the mains terminals is gained by removing the rear access cover.

The mains cable must pass through the cable clamp adjacent to the terminal block.

Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Installation & Operational Checks

After installation, check for gas soundness.

Fit the hotplate burner bodies, burner port rings, enamelled discs and pan supports referring to the instructions for use where necessary.

1.Check that the hotplate burners ignite correctly and burn with a steady flame.

Check for a steady flame on the low setting.

2.Check that with the left hand oven set at 230°C, the oven fan operates and the oven heats up.

3.Check that with the right hand oven set at 230°C, the oven heats up.

4.Check that the twin grill heats up.

5.Check that the warming drawer heats up.

6.Check operation of clock.

Instruct the user on the operation of the cooker.

For your safety

 

 

GB

 

 

 

 

Please read the precautions below before using your cooker.

•The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use

•The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.

•When moving or positioning the appliance, always use the handles provided on the sides of the oven

•Do not touch the appliance while barefoot or with wet or damp hands and feet

•The appliance must be used by adults only for the preparation of food, in accordance with the instructions provided in this booklet. Any other use of the appliance (e.g. for heating the room) constitutes improper use and is dangerous. The manufacturer may be hot be held responsible for any damage caused as a result of improper, incorrect and unreasonable use of the appliance.

•Make sure that the power supply cables of other electrical appliances do not come into contact with the hot parts of the oven

•Always grip the oven door handle in the centre: the ends may be hot.

•Always use oven gloves when placing cookware in the oven or when removing it.

•Do not place flammable materials in the oven: if the appliance is switched on accidentally, the materials could catch fire.

•When unplugging the appliance, always pull the plug from the mains socket; do not pull on the cable.

•If the event of malfunctions under no circumstances should you attempt to perform the repairs yourself. Contact an authorized Service Centre (see Assistance).

•Do not rest object on the open door

•If the cooker is placed on a pedestal, take the necessary precautions to prevent the cooker from sliding off the pedestal itself.

•The appliance is not intended to be operated by means of an external timer or separate remote-control system.

ALWAYS . . .

ALWAYS

make sure you understand the controls before using the cooker.

ALWAYS

check that all controls on the cooker are turned off after use.

ALWAYS

stand back when opening an oven door to allow heat to disperse.

ALWAYS

use dry, good quality oven gloves when removing items from the ovens.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CH 10450 GF S CH 10455 GF S CH 10456 GF S Operating InstructionsGB Warnings Control panel 12TIMER 13THERMOSTAT and Control KnobDescription of the appliance Overall viewGB Introduction InstallationEnergy Levelling Conversion for use on Butane or PropaneSpace for fixing Cooker hoodsAlways Installation & Operational ChecksPlease read the precautions below before using your cooker AlwaysNever NeverAutomatic cooking Oven timer operationTimer function buttons Setting the time of dayAuto cooking programmes Setting the minute minderTo change the time of day repeat Steps 4, 5 & 6 above Hotplate Other notes on timer operationTo USE the Hotplate Use of the griddle Safety requirements for deep fat fryingHow to deal with a fat fire GriddleTop grill When cool, butter and serveUsing the grill pan kit Some recipe ideas for your griddleTo Prepare Meat and Poultry for Roasting in Your FAN Oven Temperature and TimeFrozen Meat and Poultry Oven Control Times and Temperatures for RoastingConventional oven 2nd Oven Conventional OvenFan Oven Cooking Food Fan OvenConventional Oven Cooking Food Preparing Food for Slow Cooking GB The ‘slow cook’ settingCare and cleaning Warming compartmentDisposal of your product ‘Heat clean’ linersCleaning the griddle plate Replacement of oven light bulbGB Somethingcooker wrong with your Problem CheckPage Essential Contact Information GB After Sales ServiceHotpoint Service Parts and Accessories08448 24 24 24 Republic of Ireland 01 230 Year Parts GuaranteeExtended Guarantees Free Helpdesk Service195104111.01

CG 10455 GF S, CG 40456 GF S, CH 10450 GF S specifications

The Hotpoint CH 10450 GF S, CG 40456 GF S, and CG 10455 GF S are three high-performance cooking appliances that exemplify contemporary kitchen design and functionality. Each model brings a unique set of features and technologies aimed at enhancing the cooking experience while ensuring reliability and efficiency.

One of the primary features of the Hotpoint CH 10450 GF S is its gas cooking capability, which provides rapid heat and precise temperature control. This model includes a powerful burner system with multiple burner types, allowing cooks to select the ideal flame size for different dishes, from simmering sauces to searing meats. The easy-to-clean stainless steel surface not only enhances the look of your kitchen but also ensures a straightforward maintenance process.

The CG 40456 GF S stands out with its even cooking features, incorporating a multi-zone burner setup that distributes heat evenly across the cooking surface. This model features a large oven capacity, making it suitable for families or those who enjoy entertaining guests. With its advanced thermostat technology, it ensures that your meals cook evenly, reducing hot spots and preventing overcooking.

On the other hand, the CG 10455 GF S focuses on versatility and convenience. It integrates a range of cooking modes, which include fan-assisted cooking and traditional roasting options. This model is designed for users who seek efficiency, as it minimizes cooking times while maintaining food quality. Additionally, it comes with programmable settings, heightening user experience by allowing them to pre-set cooking times and temperatures, ideal for busy households.

All three models are equipped with safety features, such as flame supervision devices that automatically cut off the gas supply if the flame goes out. Moreover, their energy efficiency ratings contribute to a reduced environmental footprint and lower energy costs.

In summary, the Hotpoint CH 10450 GF S, CG 40456 GF S, and CG 10455 GF S are designed to meet the demands of modern kitchens. They combine innovative technologies, user-friendly features, and a commitment to safety and efficiency, making them ideal choices for both aspiring and seasoned home chefs. Their elegant designs and robust performance capabilities ensure they not only function well but also complement a contemporary kitchen aesthetic.
Top Page Image Contents