Hotpoint CH 10450 GF S manual Oven timer operation, Automatic cooking, Timer function buttons

Page 9

Oven timer operation

The oven timer (only ventilated 1stOven) offers you the following features:

1.Time of Day

2.Automatic Cooking

3.Minute Minder

Automatic cooking

The main oven can be controlled automatically.

Guidance on automatic cooking

1.Select foods which will take the same time to cook.

2.Set the oven timer so that the food has just finished or is just about to finish cooking on your return to the oven.

This will ensure the food has not cooled down and does not require reheating before serving.

3.Food should be as cold as possible when it goes into the oven, ideally straight from the refrigerator. Frozen meat and poultry should be thawed thoroughly before it is put in the oven.

4.Warm food should never be placed in the oven if there is to be a delay period. Stews prepared by frying the meat and vegetables should be cooked as soon as possible.

5.Dishes containing left-over cooked poultry or meat, for example Shepherds Pie, should not be cooked automatically if there is to be a delay period.

6.Stews and joints should be cooked by the long slow method, so that the delay period is kept to a minimum.

7.On warm days, to prevent harmful bacterial growth in certain foods (ie poultry, joints, etc) the delayed start should be kept to a minimum.

8.Wine or beer may ferment and cream may curdle during the delay period, so it is best to add these ingredients just before serving.

9.Foods which discolour should be protected by coating in fat or tossing in water to which lemon juice has been added, prior to placing food in the oven.

10.Dishes containing liquid should not be filled too full to prevent boiling over.

11.Food should be well sealed (but not airtight) in a container to prevent the loss of liquid during cooking. Aluminium foil gives a good seal.

12.Ensure food is cooked thoroughly before serving.

CLOCKFACE

The timer incorporates a 24 hour clock.

A

U

Ensure the correct time of day

T

O 0 . 0 0

is always set, before using your

 

cooker.

SYMBOLS

 

0 . 0 0

A ‘bell’ symbol will light up when you

select a Minute Minder Period and

 

 

 

The ‘cookpot’ symbol will light up

 

 

 

 

 

 

0 . 0 0

GB

 

either:-

 

- When the timer is in manual mode, or

 

 

 

 

 

 

- During the actual Cook Period.

 

 

 

 

‘AUTO’ will light up:-

 

 

0 . 0 0

 

A

 

- When the timer is first turned on

 

U

 

T

 

O

it will flash. It will go out when a time

 

of day is set or when the timer is set to manual.

The ‘AUTO’ symbol will flash at the end of an Auto Cooking programme to indicate that the programme has finished.

(When the ‘AUTO’ symbol is flashing, to return the oven to Manual operation, turn the oven controls off, ensure that the correct time of day is set, and press the “Manual” button - The ‘AUTO’ symbol will go out).

Timer function buttons

Minute Minder Button

Hereyoucansetatimeperiodofupto23hours59minutes,thatwill countdown.Whenitreacheszero,thetimerwillemitanaudibletone. For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.

Auto cooking programme

Cook Period Button

Cook Period is the actual length of time for which, the timer will switch the oven(s) on as part of an “Auto Cooking” programme. (e.g. If you set 2 hours, the food will be cooked for 2 hours).

End Time Button

The time of day at which you want an “Auto Cooking” programme to end.

For Example: If you set a “Cook Period” for 2 hours, and “End Time” of 11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme has finished.

Notes:

-When setting an Auto Cooking programme you will need to set the oven control(s) to the required temperature(s) when you set the timer.

-If an Auto Cooking programme has been set the oven(s) will only operate during the pre-programmed time.

Manual Button

Needs to be pressed to cancel an Auto Cooking programme and return the oven(s) to Manual operation.

“+” and “-” Buttons

Used to adjust the various timer function settings.

Setting the time of day

will remain lit for the period set.

At the end of the Minute Minder Period, the timer will emit an audible

tone and the ‘bell’ symbol will disappear.

U

A 0 . 0 0

T

O

Step 1 Make sure all oven controls are turned Off.

Step 2 Check the electricity supply to the cooker is turned on.

Step 3 When switched on the display will show 0.00 and the Auto symbol, flashing intermittently.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

9

Image 9
Contents CH 10450 GF S CH 10455 GF S CH 10456 GF S Operating InstructionsGB Warnings Description of the appliance 12TIMER 13THERMOSTAT and Control KnobOverall view Control panelGB Introduction InstallationEnergy Space for fixing Conversion for use on Butane or PropaneCooker hoods LevellingPlease read the precautions below before using your cooker Installation & Operational ChecksAlways AlwaysNever NeverTimer function buttons Oven timer operationSetting the time of day Automatic cookingSetting the minute minder Auto cooking programmesTo change the time of day repeat Steps 4, 5 & 6 above Other notes on timer operation HotplateTo USE the Hotplate How to deal with a fat fire Safety requirements for deep fat fryingGriddle Use of the griddleUsing the grill pan kit When cool, butter and serveSome recipe ideas for your griddle Top grillTemperature and Time To Prepare Meat and Poultry for Roasting in Your FAN OvenFrozen Meat and Poultry Conventional oven 2nd Oven Times and Temperatures for RoastingConventional Oven Oven ControlFan Oven Cooking Food Fan OvenConventional Oven Cooking Food Care and cleaning GB The ‘slow cook’ settingWarming compartment Preparing Food for Slow CookingCleaning the griddle plate ‘Heat clean’ linersReplacement of oven light bulb Disposal of your productGB Somethingcooker wrong with your Problem CheckPage Hotpoint Service GB After Sales ServiceParts and Accessories Essential Contact InformationExtended Guarantees Year Parts GuaranteeFree Helpdesk Service 08448 24 24 24 Republic of Ireland 01 230195104111.01

CG 10455 GF S, CG 40456 GF S, CH 10450 GF S specifications

The Hotpoint CH 10450 GF S, CG 40456 GF S, and CG 10455 GF S are three high-performance cooking appliances that exemplify contemporary kitchen design and functionality. Each model brings a unique set of features and technologies aimed at enhancing the cooking experience while ensuring reliability and efficiency.

One of the primary features of the Hotpoint CH 10450 GF S is its gas cooking capability, which provides rapid heat and precise temperature control. This model includes a powerful burner system with multiple burner types, allowing cooks to select the ideal flame size for different dishes, from simmering sauces to searing meats. The easy-to-clean stainless steel surface not only enhances the look of your kitchen but also ensures a straightforward maintenance process.

The CG 40456 GF S stands out with its even cooking features, incorporating a multi-zone burner setup that distributes heat evenly across the cooking surface. This model features a large oven capacity, making it suitable for families or those who enjoy entertaining guests. With its advanced thermostat technology, it ensures that your meals cook evenly, reducing hot spots and preventing overcooking.

On the other hand, the CG 10455 GF S focuses on versatility and convenience. It integrates a range of cooking modes, which include fan-assisted cooking and traditional roasting options. This model is designed for users who seek efficiency, as it minimizes cooking times while maintaining food quality. Additionally, it comes with programmable settings, heightening user experience by allowing them to pre-set cooking times and temperatures, ideal for busy households.

All three models are equipped with safety features, such as flame supervision devices that automatically cut off the gas supply if the flame goes out. Moreover, their energy efficiency ratings contribute to a reduced environmental footprint and lower energy costs.

In summary, the Hotpoint CH 10450 GF S, CG 40456 GF S, and CG 10455 GF S are designed to meet the demands of modern kitchens. They combine innovative technologies, user-friendly features, and a commitment to safety and efficiency, making them ideal choices for both aspiring and seasoned home chefs. Their elegant designs and robust performance capabilities ensure they not only function well but also complement a contemporary kitchen aesthetic.