Denon AVR-4802 manual Speaker system layout, Surround speaker selector function

Page 17

NOTES:

•The on-screen display signals are not output from the MONITOR OUT-2 output jack or the color difference (component) video signal (MONITOR OUT) jacks.

•The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-4802’s S-Video and video monitor output jacks and signals are input to the AVR-4802 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 31.)

•The AVR-4802’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with small screens or low resolutions.

•The setup menu is not displayed when headphones are being used.

•Speaker system layout

Basic system layout (For a THX Surround EX system)

• The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor:

Subwoofer

Center speaker system

Surround back speaker systems

Front speaker systems

 

Set these at the sides of the TV or screen with

 

their front surfaces as flush with the front of the

Surround speaker systems

screen as possible.

 

With the AVR-4802 it is also possible to use the surround speaker selector function to choose the best layout for a variety of sources and surround modes.

•Surround speaker selector function

This function makes it possible to achieve the optimum sound fields for different sources by switching between two systems of surround speakers (A and B). The settings of the different speakers (A only, B only or A+B) are stored in the memory for the different surround modes, so they are set automatically when the surround mode is selected.

A

 

 

A

B

SB

SB

B

 

 

A

 

 

A

B

SB

SB

B

 

 

(SB: Surround Back Speakers)

Using A only

(Multi surround speaker system)

Using B only

(Single surround speaker system)

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents AVR-4802 Safety Precautions Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting a TV, DBS/SAT tuner TV or DBS/SAT Connecting video componentsPrecaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting a DVD player DVD in jacks FM Antenna Connecting the antenna terminalsConnecting the Multi Source jacks Connecting the external input EXT. in jacksSpeaker Impedance Connecting the speaker cordsSpeaker system connections Surround Speaker Systems a ConnectionsFront Panel Part Names and FunctionsRemote control unit Mute Setting UP the SystemSurround speaker selector function Speaker system layout6, 7 Before setting up the systemSetting the type of speakers Parameters Setting the Crossover FrequencyAssignment of low frequency signal range Setting the Subwoofer modeSubwoofer mode Variable 40, 60, 80, 100, 120 HzNon-Flag Source SB ch Output setting Setting the THX Surround EX / DTS-ES Source AutoTHX surround EX/DTS ES Auto Flag Detect Mode Afdm setting Preparations Setting the delay timePower amplifier assignment function setting Setting the Multi Zone Control40 dB, 0 dB VariableSetting the channel level Channel Level screen reappears Subwoofer peak limit level setting Setting the Digital In Assignment Auto tuner presets Setting the on-screen display OSDUsing the remote control unit Remote Control UnitAfter completing system setup Remote control unit’s jog stick Before operating Operating the remote control unitIs called the cursor mode OperationExample CD Input mode selection functionPlaying the input source Example Stereo Adjusting the sound quality toneAfter starting playback Switching the surround speakers Listening over headphonesTurning the sound off temporarily muting Checking the currently playing program source, etcRecording Dolby Digital and DTS multichannel sources Playing one source while recording another REC OUT modeMulti-source recording/playback Display Multi indicator lightsPlayback using the external input EXT. in jacks Direct mode Pure Direct modeStereo mode Playing audio sources CDs and DVDsMulti Room Music Entertainment System Multi-source and multi-zone playbackWhen using the SB/MULTI speaker terminals When using the PRE OUT Multi Zone terminalsPress the CH VOL button and select SurroundBefore playing with the surround function Press the CH VOL button, and select Fader functionTHX Dscrt 6.1, Mtrx Playing modes for different sourcesSurround parameters q THX Surround EX / Home THX Cinema modeAfdm Auto Flag Detect Mode Checking the input signal Select the input source COMP. Dynamic Range Compression Surround parameters w Cinema EQ. Cinema EqualizerLFE Low frequency Effect Dialogue NormalizationDolby PRO Logic Dolby Surround Pro Logic II modePANORAMA/DIMENSION/CENTER Width setting Default setting Cinema EQ settingSurround parameters e Pro Logic II Mode Dimension ControlPlay a program source Disolay the Surround Parameter Menu DTS Neo6 modePersonal Memory Plus Surround modes and their featuresDenon Original Surround Modes DSP surround simulation Select Tone Tone control settingEffect Surround parameters rSurround modes and parameters Listening to the Radio Auto tuningManual tuning Checking the preset stations Preset memoryRemote control unit Main unitInitialization of the Microprocessor Recalling preset stationsLast Function Memory Troubleshooting Additional Information Types of multi-channel signalsOptimum surround sound for different sources Movie audioNumber of surround back speakers Surround back speakersSpeaker setting examples When not using surround back speakers When using different surround speakers for movies and musicDolby Surround Dolby Digital Dolby Surround AC-3 SurroundDolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDTS compatible media and playback methods Dolby Pro LogicDTS Digital Surround DTS-ESTMDiscrete DTS-ES Extended Surround TMDTS-ESTMMatrix DTS Neo6TM surroundHome THX Cinema Surround DTS 96/24Re-EqualizationTM Timbre MatchingTMTHX Surround EX Surround modes and parameters Audio section Specifications14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan

AVR-4802 specifications

The Denon AVR-4802 is a premium home theater receiver that has garnered a reputation for delivering exceptional audio and video performance. Launched as part of Denon's celebrated line of A/V receivers, the AVR-4802 exemplifies the brand's commitment to quality and innovation in the realm of home entertainment.

One of the key features of the AVR-4802 is its robust amplification capability. It provides a powerful 110 watts per channel, allowing users to enjoy a dynamic and impactful soundstage. The receiver is equipped with multiple channels, which facilitates a fully immersive surround sound experience, accommodating various speaker configurations, including traditional 5.1 and more advanced setups like 7.1 surround sound.

The AVR-4802 incorporates cutting-edge surround sound processing technologies, including Dolby Digital and DTS, ensuring high-fidelity audio reproduction for both movies and music. Additionally, it supports 24-bit/192kHz audio playback, which enhances the detail and clarity of sound, making it suitable for both casual listeners and audiophiles.

In terms of video capabilities, the AVR-4802 supports high-quality video formats, including progressive scan for smoother images, and it features multiple video inputs, including S-Video and composite connections. This versatility allows users to connect various devices, such as DVD players and gaming consoles, simplifying the integration of a comprehensive home theater system.

The receiver also comes with advanced DSP (Digital Signal Processing) algorithms that optimize audio output based on the environment, providing an improved listening experience regardless of the room's acoustics. This feature further enhances the AVR-4802's appeal to home theater enthusiasts looking for customizability.

Another outstanding characteristic of the AVR-4802 is its user-friendly interface, featuring a comprehensive on-screen display that simplifies setup and operation. It includes a remote control that offers convenient access to all functionalities, making navigation through various settings intuitive.

Additionally, the AVR-4802 is equipped with multiple digital and analog inputs, which provides flexibility in connecting other audio and video components. The receiver's build quality is also noteworthy, reflecting Denon's attention to detail, ensuring durability and performance.

Overall, the Denon AVR-4802 is a well-rounded A/V receiver that combines power, advanced technologies, and user-friendly features to create an ideal centerpiece for any home theater system, offering an unparalleled entertainment experience for users who appreciate high-quality sound and video.
Top Page Image Contents