Denon AVR-4802 manual Specifications, Audio section

Page 71

17 SPECIFICATIONS

2Audio section

•Power amplifier Rated output:

Dynamic power:

Output terminals:

•Analog

Input sensitivity / input impedance: Frequency response:

S/N:

Distortion: Rated output:

•Digital

D/A output:

Digital input:

•Phono equalizer (PHONO input — REC OUT) Input sensitivity:

RIAA deviation: Signal-to-noise ratio:

Rated output / Maximum output: Distortion factor:

2Video section

•Standard video jacks

Input / output level and impedance: Frequency response:

•S-video jacks

Input / output level and impedance: Frequency response:

•Color component video terminal Input / output level and impedance:

Frequency response:

2Tuner section

Receiving Range:

Usable Sensitivity:

50 dB Quieting Sensitivity:

Signal to Noise Ratio (IHF-A):

Total Harmonic Distortion (at 1 kHz):

2General

Power supply:

Power consumption:

Maximum external dimensions:

Mass:

2Remote control unit (RC-8000) Batteries:

External dimensions: Mass:

Front:

125 W + 125 W

(8 Ω

/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

 

150 W + 150 W

(6 Ω

/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

Center:

125 W + 125 W

(8 Ω

/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

 

150 W + 150 W

(6 Ω

/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

Surround:

125 W + 125 W

(8 Ω

/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

 

150 W + 150 W

(6 Ω

/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

Surround Back

125 W + 125 W

(8 Ω

/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

/Multi:

150 W + 150 W

(6 Ω

/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

170 W x 2 ch

(8 Ω

/ohms)

 

 

270 W x 2 ch

(4 Ω

/ohms)

 

 

350 W x 2 ch

(2 Ω

/ohms)

 

 

Front/Center/Surround Back:

6 ~ 16 Ω

/ohms

Surround:

A or B

6 ~ 16 Ω

/ohms

 

A + B

8 ~ 16 Ω

/ohms

200 mV /

47 kΩ /kohms

 

 

10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode) 105 dB (DIRECT mode)

0.005% (20 Hz ~ 20 kHz) (DIRECT mode)

1.2 V

Rated output — 2 V (at 0 dB playback)

Total harmonic distortion — 0.005% (1 kHz, at 0 dB)

S/N ratio — 110 dB

Dynamic range — 108 dB

Format — Digital audio interface

2.5 mV

±1 dB (20 Hz to 20 kHz)

74 dB (A weighting, with 5 mV input)

150 mV / 8 V

0.03% (1 kHz, 3 V)

1 Vp-p, 75 Ω /ohms

5 Hz ~ 10 MHz — +0, –3 dB

Y (brightness) signal — 1 Vp-p, 75 Ω /ohms C (color) signal — 0.286 Vp-p, 75 Ω /ohms 5 Hz ~ 10 MHz — +0, –3 dB

Y (brightness) signal — 1 Vp-p, 75 Ω

/ohms

 

PB/CB (blue) signal

— 0.7 Vp-p, 75 Ω

/ohms

 

PR/CR (red) signal

— 0.7Vp-p, 75 Ω /ohms

 

DC ~ 50 MHz — +0, –3 dB

 

 

[FM] (note: µV at 75 Ω /ohms, 0 dBf = 1 x 10–15W)

[AM]

87.5 MHz ~ 107.9 MHz

 

520 kHz ~ 1710 kHz

1.0 µV (11.2 dBf)

 

 

18 µV

MONO

1.6 µV (15.3 dBf)

 

 

STEREO

23 µV (38.5 dBf)

 

 

MONO

79 dB

 

 

50 dB

STEREO

74 dB

 

 

 

MONO

0.15%

 

 

 

STEREO

0.3%

 

 

 

AC 120 V, 60 Hz 10.5 A

434 (W) x 179 (H) x 485 (D) mm (17-3/32” x 7-3/64” x 19-3/32”) 20.5 kg (45 lbs 3.1 oz)

LR6/AA Type (four batteries)

96 (W) x 38 (H) x 168.5 (D) mm (3-25/32” x 1-1/2” x 6-41/64”) 242 g (Approx. 8.5 oz) (not including batteries)

* For purposes of improvement, specifications and design are subject to change without notice.

71

Page 70 Page 72
Image 71
Page 70 Page 72
Contents AVR-4802 Safety Precautions Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting a TV, DBS/SAT tuner TV or DBS/SAT Connecting video componentsPrecaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting a DVD player DVD in jacks FM Antenna Connecting the antenna terminalsConnecting the Multi Source jacks Connecting the external input EXT. in jacksSpeaker Impedance Connecting the speaker cordsSpeaker system connections Surround Speaker Systems a ConnectionsFront Panel Part Names and FunctionsRemote control unit Mute Setting UP the SystemSurround speaker selector function Speaker system layout6, 7 Before setting up the systemSetting the type of speakers Parameters Setting the Crossover FrequencyVariable 40, 60, 80, 100, 120 Hz Setting the Subwoofer modeAssignment of low frequency signal range Subwoofer modeNon-Flag Source SB ch Output setting Setting the THX Surround EX / DTS-ES Source AutoTHX surround EX/DTS ES Auto Flag Detect Mode Afdm setting Preparations Setting the delay timePower amplifier assignment function setting Setting the Multi Zone Control40 dB, 0 dB VariableSetting the channel level Channel Level screen reappears Subwoofer peak limit level setting Setting the Digital In Assignment Auto tuner presets Setting the on-screen display OSDUsing the remote control unit Remote Control UnitAfter completing system setup Operation Before operating Operating the remote control unitRemote control unit’s jog stick Is called the cursor modeExample CD Input mode selection functionPlaying the input source Example Stereo Adjusting the sound quality toneAfter starting playback Checking the currently playing program source, etc Listening over headphonesSwitching the surround speakers Turning the sound off temporarily mutingRecording Dolby Digital and DTS multichannel sources Playing one source while recording another REC OUT modeMulti-source recording/playback Display Multi indicator lightsPlayback using the external input EXT. in jacks Playing audio sources CDs and DVDs Pure Direct modeDirect mode Stereo modeMulti Room Music Entertainment System Multi-source and multi-zone playbackWhen using the SB/MULTI speaker terminals When using the PRE OUT Multi Zone terminalsPress the CH VOL button and select SurroundBefore playing with the surround function Press the CH VOL button, and select Fader functionTHX Dscrt 6.1, Mtrx Playing modes for different sourcesSurround parameters q THX Surround EX / Home THX Cinema modeAfdm Auto Flag Detect Mode Checking the input signal Select the input source Dialogue Normalization Surround parameters w Cinema EQ. Cinema EqualizerCOMP. Dynamic Range Compression LFE Low frequency EffectDolby PRO Logic Dolby Surround Pro Logic II modeDimension Control Cinema EQ settingPANORAMA/DIMENSION/CENTER Width setting Default setting Surround parameters e Pro Logic II ModePlay a program source Disolay the Surround Parameter Menu DTS Neo6 modePersonal Memory Plus Surround modes and their featuresDenon Original Surround Modes DSP surround simulation Select Tone Tone control settingEffect Surround parameters rSurround modes and parameters Listening to the Radio Auto tuningManual tuning Main unit Preset memoryChecking the preset stations Remote control unitInitialization of the Microprocessor Recalling preset stationsLast Function Memory Troubleshooting Movie audio Types of multi-channel signalsAdditional Information Optimum surround sound for different sourcesNumber of surround back speakers Surround back speakersSpeaker setting examples When not using surround back speakers When using different surround speakers for movies and musicDolby Digital compatible media and playback methods SurroundDolby Surround Dolby Digital Dolby Surround AC-3 Dolby Digital and Dolby Pro LogicDTS compatible media and playback methods Dolby Pro LogicDTS Digital Surround DTS Neo6TM surround DTS-ES Extended Surround TMDTS-ESTMDiscrete DTS-ESTMMatrixTimbre MatchingTM DTS 96/24Home THX Cinema Surround Re-EqualizationTMTHX Surround EX Surround modes and parameters Audio section Specifications14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan

AVR-4802 specifications

The Denon AVR-4802 is a premium home theater receiver that has garnered a reputation for delivering exceptional audio and video performance. Launched as part of Denon's celebrated line of A/V receivers, the AVR-4802 exemplifies the brand's commitment to quality and innovation in the realm of home entertainment.

One of the key features of the AVR-4802 is its robust amplification capability. It provides a powerful 110 watts per channel, allowing users to enjoy a dynamic and impactful soundstage. The receiver is equipped with multiple channels, which facilitates a fully immersive surround sound experience, accommodating various speaker configurations, including traditional 5.1 and more advanced setups like 7.1 surround sound.

The AVR-4802 incorporates cutting-edge surround sound processing technologies, including Dolby Digital and DTS, ensuring high-fidelity audio reproduction for both movies and music. Additionally, it supports 24-bit/192kHz audio playback, which enhances the detail and clarity of sound, making it suitable for both casual listeners and audiophiles.

In terms of video capabilities, the AVR-4802 supports high-quality video formats, including progressive scan for smoother images, and it features multiple video inputs, including S-Video and composite connections. This versatility allows users to connect various devices, such as DVD players and gaming consoles, simplifying the integration of a comprehensive home theater system.

The receiver also comes with advanced DSP (Digital Signal Processing) algorithms that optimize audio output based on the environment, providing an improved listening experience regardless of the room's acoustics. This feature further enhances the AVR-4802's appeal to home theater enthusiasts looking for customizability.

Another outstanding characteristic of the AVR-4802 is its user-friendly interface, featuring a comprehensive on-screen display that simplifies setup and operation. It includes a remote control that offers convenient access to all functionalities, making navigation through various settings intuitive.

Additionally, the AVR-4802 is equipped with multiple digital and analog inputs, which provides flexibility in connecting other audio and video components. The receiver's build quality is also noteworthy, reflecting Denon's attention to detail, ensuring durability and performance.

Overall, the Denon AVR-4802 is a well-rounded A/V receiver that combines power, advanced technologies, and user-friendly features to create an ideal centerpiece for any home theater system, offering an unparalleled entertainment experience for users who appreciate high-quality sound and video.
Top Page Image Contents