Denon AVR-4802 manual Speaker setting examples

60 to 90 cm

As seen from the side

Speaker setting examples

Here we describe a number of speaker settings for different purposes. Use these examples as guides to set up your system according to the type of speakers used and the main usage purpose.

1.For THX Surround EX systems (using surround back speakers)

(1)Basic setting for primarily watching movies

This is recommended when mainly playing movies and using regular single way or 2-way speakers for the surround speakers.

Front speakers

Center speaker

Monitor

Subwoofer

45°

Surround

speakers

60°

Surround back speakers

As seen from above

• Set the front speakers with their front surfaces as flush with the TV
or monitor screen as possible. Set the center speaker between the	Surround speaker	Surround back
front left and right speakers and no further from the listening position		speaker		Point slightly
than the front speakers.	Front speaker
				downwards
• Consult the owner’s manual for your subwoofer for advice on placing
the subwoofer within the listening room.
• If the surround speakers are direct-radiating (monopolar) then place			60 to 90 cm
them slightly behind and at an angle to the listening position and
parallel to the walls at a position 60 to 90 centimeters (2 to 3 feet)
above ear level at the prime listening position.	As seen from the side

•When using two surround back speakers, place them at the back

facing the front at a narrower distance than the front left and right speakers. When using one surround back speaker, place it at the rear center facing the front at a slightly higher position (0 to 20 cm) than the surround speakers.

•We recommend installing the surround back speaker(s) at a slightly downward facing angle. This effectively prevents the surround back channel signals from reflecting off the monitor or screen at the front center, resulting in interference and making the sense of movement from the front to the back less sharp.

•Connect the surround speakers to the surround speaker A jacks on the AVR-4802 and set all settings on the setup menu to “A”. (This is the factory default setting. For details, see page 16.)

(2)Setting for primarily watching movies using diffusion type speakers for the surround speakers

For the greatest sense of surround sound envelopment, diffuse radiation speakers such as bipolar types, or dipolar (THX) types, provide a wider dispersion than is possible to obtain from a direct radiating speaker (monopolar). Place these speakers at either side of the prime listening position, mounted above ear level.

Path of the surround sound from the speakers to the listening position

Surround

speakers

60°

Surround back speakers

As seen from above

•Set the front speakers, center speaker and subwoofer in the same

positions as in example (1).	Surround speaker	Surround back
• It is best to place the surround speakers directly at the side or slightly		speaker	Point slightly
to the front of the viewing position, and 60 to 90 cm above the ears.	Front speaker		downwards

•Same as surround back speaker installation method (1).

Using dipolar speakers for the surround back speakers as well is more effective.

•Connect the surround speakers to the surround speaker A jacks on the AVR-4802 and set all settings on the setup menu to “A”. (This is

the factory default setting. For details, see page 16.)

•The signals from the surround channels reflect off the walls as

shown on the diagram at the left, creating an enveloping and realistic surround sound presentation. For multi-channel music sources however, the use of bipolar or dipolar

speakers mounted at the sides of the listening position may not be satisfactory in order to create a coherent 360 degree surround sound field. Connect another pair of direct radiating speakers as described in example (3) and place them at the rear corners of the room facing towards the prime listening position.

63