Denon AVR-4802 manual Fader function, Press the CH VOL button, and select

Page 43

Fader function

•This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources.

1

MAIN UNIT:

Press the CH VOL button, and select

“FADER”.

REMOTE CONTROL UNIT:

Select “FADER”.

CH VOL

(Main unit)

(Remote control unit)

1

2

 

The channel switches in the order shown below each time this button is pressed.

FL

C

FR

SR

SBR

SBL

 

FADER

SW

 

SL

 

2

MAIN UNIT:

SELECT

Turn the SELECT knob clockwise to

 

adjust the volume of the surround side

2

 

collectively. Turn the CONTROL knob

 

counterclockwise to adjust the volume

(Main unit)

 

of the front side collectively.

1

REMOTE CONTROL UNIT:

Press the CURSOR/PAGE button on the “SURROUND 2/5” page to highlight the display. The channel (speaker) switches as shown on the diagram below each time it is pressed.

REMOTE CONTROL UNIT:

Move jog stick “ENTER” to the top side to adjust the volume of the surround side collectively.

Move jog stick “ENTER” to the bottom side to adjust the volume of the front side collectively.

(Remote control unit)

(Remote control unit)

This is only displayed when setting the fader control.

The fader function does not affect the SW channel.

The channel whose channel level is adjusted lowest can be faded to –12 dB using the fader function.

If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents AVR-4802 Safety Precautions Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting a TV, DBS/SAT tuner TV or DBS/SAT Connecting video componentsPrecaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting a DVD player DVD in jacks FM Antenna Connecting the antenna terminalsConnecting the Multi Source jacks Connecting the external input EXT. in jacksSpeaker system connections Connecting the speaker cordsSpeaker Impedance Surround Speaker Systems a ConnectionsFront Panel Part Names and FunctionsRemote control unit Mute Setting UP the SystemSurround speaker selector function Speaker system layout6, 7 Before setting up the systemSetting the type of speakers Parameters Setting the Crossover FrequencyVariable 40, 60, 80, 100, 120 Hz Setting the Subwoofer modeAssignment of low frequency signal range Subwoofer modeTHX surround EX/DTS ES Auto Flag Detect Mode Afdm setting Setting the THX Surround EX / DTS-ES Source AutoNon-Flag Source SB ch Output setting Preparations Setting the delay timePower amplifier assignment function setting Setting the Multi Zone Control40 dB, 0 dB VariableSetting the channel level Channel Level screen reappears Subwoofer peak limit level setting Setting the Digital In Assignment Auto tuner presets Setting the on-screen display OSDAfter completing system setup Remote Control UnitUsing the remote control unit Operation Before operating Operating the remote control unitRemote control unit’s jog stick Is called the cursor modePlaying the input source Input mode selection functionExample CD After starting playback Adjusting the sound quality toneExample Stereo Checking the currently playing program source, etc Listening over headphonesSwitching the surround speakers Turning the sound off temporarily mutingMulti-source recording/playback Playing one source while recording another REC OUT modeRecording Dolby Digital and DTS multichannel sources Display Multi indicator lightsPlayback using the external input EXT. in jacks Playing audio sources CDs and DVDs Pure Direct modeDirect mode Stereo modeMulti Room Music Entertainment System Multi-source and multi-zone playbackWhen using the SB/MULTI speaker terminals When using the PRE OUT Multi Zone terminalsBefore playing with the surround function SurroundPress the CH VOL button and select Press the CH VOL button, and select Fader functionTHX Dscrt 6.1, Mtrx Playing modes for different sourcesAfdm Auto Flag Detect Mode THX Surround EX / Home THX Cinema modeSurround parameters q Checking the input signal Select the input source Dialogue Normalization Surround parameters w Cinema EQ. Cinema EqualizerCOMP. Dynamic Range Compression LFE Low frequency EffectDolby PRO Logic Dolby Surround Pro Logic II modeDimension Control Cinema EQ settingPANORAMA/DIMENSION/CENTER Width setting Default setting Surround parameters e Pro Logic II ModePlay a program source Disolay the Surround Parameter Menu DTS Neo6 modeDenon Original Surround Modes Surround modes and their featuresPersonal Memory Plus DSP surround simulation Select Tone Tone control settingEffect Surround parameters rSurround modes and parameters Manual tuning Auto tuningListening to the Radio Main unit Preset memoryChecking the preset stations Remote control unitLast Function Memory Recalling preset stationsInitialization of the Microprocessor Troubleshooting Movie audio Types of multi-channel signalsAdditional Information Optimum surround sound for different sourcesNumber of surround back speakers Surround back speakersSpeaker setting examples When not using surround back speakers When using different surround speakers for movies and musicDolby Digital compatible media and playback methods SurroundDolby Surround Dolby Digital Dolby Surround AC-3 Dolby Digital and Dolby Pro LogicDTS Digital Surround Dolby Pro LogicDTS compatible media and playback methods DTS Neo6TM surround DTS-ES Extended Surround TMDTS-ESTMDiscrete DTS-ESTMMatrixTimbre MatchingTM DTS 96/24Home THX Cinema Surround Re-EqualizationTMTHX Surround EX Surround modes and parameters Audio section Specifications14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan

AVR-4802 specifications

The Denon AVR-4802 is a premium home theater receiver that has garnered a reputation for delivering exceptional audio and video performance. Launched as part of Denon's celebrated line of A/V receivers, the AVR-4802 exemplifies the brand's commitment to quality and innovation in the realm of home entertainment.

One of the key features of the AVR-4802 is its robust amplification capability. It provides a powerful 110 watts per channel, allowing users to enjoy a dynamic and impactful soundstage. The receiver is equipped with multiple channels, which facilitates a fully immersive surround sound experience, accommodating various speaker configurations, including traditional 5.1 and more advanced setups like 7.1 surround sound.

The AVR-4802 incorporates cutting-edge surround sound processing technologies, including Dolby Digital and DTS, ensuring high-fidelity audio reproduction for both movies and music. Additionally, it supports 24-bit/192kHz audio playback, which enhances the detail and clarity of sound, making it suitable for both casual listeners and audiophiles.

In terms of video capabilities, the AVR-4802 supports high-quality video formats, including progressive scan for smoother images, and it features multiple video inputs, including S-Video and composite connections. This versatility allows users to connect various devices, such as DVD players and gaming consoles, simplifying the integration of a comprehensive home theater system.

The receiver also comes with advanced DSP (Digital Signal Processing) algorithms that optimize audio output based on the environment, providing an improved listening experience regardless of the room's acoustics. This feature further enhances the AVR-4802's appeal to home theater enthusiasts looking for customizability.

Another outstanding characteristic of the AVR-4802 is its user-friendly interface, featuring a comprehensive on-screen display that simplifies setup and operation. It includes a remote control that offers convenient access to all functionalities, making navigation through various settings intuitive.

Additionally, the AVR-4802 is equipped with multiple digital and analog inputs, which provides flexibility in connecting other audio and video components. The receiver's build quality is also noteworthy, reflecting Denon's attention to detail, ensuring durability and performance.

Overall, the Denon AVR-4802 is a well-rounded A/V receiver that combines power, advanced technologies, and user-friendly features to create an ideal centerpiece for any home theater system, offering an unparalleled entertainment experience for users who appreciate high-quality sound and video.
Top Page Image Contents