Denon Comprehensive Multi Zone Receiver Manual for Setup and Configuration
Page 24

6

 

 

Set the distance between the

 

 

 

 

 

 

center speaker and listening

 

 

 

position.

 

 

 

The distance changes in units of 1

 

 

 

foot (0.1 meters) each time the

 

 

 

 

 

button is pressed. Select the value

 

 

 

closest to the measured distance.

Example: When the distance is set to 12 feet for the center speaker

If “Yes” is selected for “Default”, the settings are automatically reset to the default values.

Please note that the difference of distance for every speaker should be 15 ft (4.5 m) or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In this case, please relocate the blinking speaker(s) so that its distance is no larger than the value shown in highlighted line.

7

Enter the setting.

 

 

The System Setup Menu reappears.

 

The AVR-4802 automatically sets the optimum surround delay time for the listening room.

Setting the Multi Zone Control

Multi-zone is a pre-output with an output level adjustment function.

Using the power amplifier assignment function described below, it is also possible to connect speakers to the SB/MULTI speaker terminals.

[1] Power amplifier assignment function setting

Make this setting to switch the power amplifier for the surround back channel to Multi-zone.

1

At the System Setup Menu, select “Multi Zone Control”.

 

2

Press jog stick “ENTER” to switch to the “Multi Zone Control” screen.

 

3

Select “Power Amp Assignment” then press the “ENTER” button on the jog stick.

 

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents AVR-4802 Safety Precautions Safety Instructions Table of Contents Before UsingFeatures Connecting the audio components ConnectionsConnecting video components Connecting a TV, DBS/SAT tuner TV or DBS/SATConnecting a video component equipped with S-Video jacks Precaution when using S-jacksConnecting a DVD player DVD in jacks Connecting the antenna terminals FM AntennaConnecting the external input EXT. in jacks Connecting the Multi Source jacksConnecting the speaker cords Speaker system connectionsSpeaker Impedance Connections Surround Speaker Systems aPart Names and Functions Front PanelRemote control unit Setting UP the System MuteSpeaker system layout Surround speaker selector functionBefore setting up the system 6, 7Setting the type of speakers Setting the Crossover Frequency ParametersSetting the Subwoofer mode Assignment of low frequency signal rangeSubwoofer mode Variable 40, 60, 80, 100, 120 HzSetting the THX Surround EX / DTS-ES Source Auto THX surround EX/DTS ES Auto Flag Detect Mode Afdm settingNon-Flag Source SB ch Output setting Setting the delay time PreparationsSetting the Multi Zone Control Power amplifier assignment function settingVariable 40 dB, 0 dBSetting the channel level Channel Level screen reappears Subwoofer peak limit level setting Setting the Digital In Assignment Setting the on-screen display OSD Auto tuner presetsRemote Control Unit After completing system setupUsing the remote control unit Before operating Operating the remote control unit Remote control unit’s jog stickIs called the cursor mode OperationInput mode selection function Playing the input sourceExample CD Adjusting the sound quality tone After starting playbackExample Stereo Listening over headphones Switching the surround speakersTurning the sound off temporarily muting Checking the currently playing program source, etcPlaying one source while recording another REC OUT mode Multi-source recording/playbackRecording Dolby Digital and DTS multichannel sources Multi indicator lights DisplayPlayback using the external input EXT. in jacks Pure Direct mode Direct modeStereo mode Playing audio sources CDs and DVDsMulti-source and multi-zone playback Multi Room Music Entertainment SystemWhen using the PRE OUT Multi Zone terminals When using the SB/MULTI speaker terminalsSurround Before playing with the surround functionPress the CH VOL button and select Fader function Press the CH VOL button, and selectPlaying modes for different sources THX Dscrt 6.1, MtrxTHX Surround EX / Home THX Cinema mode Afdm Auto Flag Detect ModeSurround parameters q Checking the input signal Select the input source Surround parameters w Cinema EQ. Cinema Equalizer COMP. Dynamic Range CompressionLFE Low frequency Effect Dialogue NormalizationDolby Surround Pro Logic II mode Dolby PRO LogicCinema EQ setting PANORAMA/DIMENSION/CENTER Width setting Default settingSurround parameters e Pro Logic II Mode Dimension ControlDTS Neo6 mode Play a program source Disolay the Surround Parameter MenuSurround modes and their features Denon Original Surround ModesPersonal Memory Plus DSP surround simulation Tone control setting Select ToneSurround parameters r EffectSurround modes and parameters Auto tuning Manual tuningListening to the Radio Preset memory Checking the preset stationsRemote control unit Main unitRecalling preset stations Last Function MemoryInitialization of the Microprocessor Troubleshooting Types of multi-channel signals Additional InformationOptimum surround sound for different sources Movie audioSurround back speakers Number of surround back speakersSpeaker setting examples When using different surround speakers for movies and music When not using surround back speakersSurround Dolby Surround Dolby Digital Dolby Surround AC-3Dolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDolby Pro Logic DTS Digital SurroundDTS compatible media and playback methods DTS-ES Extended Surround TM DTS-ESTMDiscreteDTS-ESTMMatrix DTS Neo6TM surroundDTS 96/24 Home THX Cinema SurroundRe-EqualizationTM Timbre MatchingTMTHX Surround EX Surround modes and parameters Specifications Audio section14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan

AVR-4802 specifications

The Denon AVR-4802 is a premium home theater receiver that has garnered a reputation for delivering exceptional audio and video performance. Launched as part of Denon's celebrated line of A/V receivers, the AVR-4802 exemplifies the brand's commitment to quality and innovation in the realm of home entertainment.

One of the key features of the AVR-4802 is its robust amplification capability. It provides a powerful 110 watts per channel, allowing users to enjoy a dynamic and impactful soundstage. The receiver is equipped with multiple channels, which facilitates a fully immersive surround sound experience, accommodating various speaker configurations, including traditional 5.1 and more advanced setups like 7.1 surround sound.

The AVR-4802 incorporates cutting-edge surround sound processing technologies, including Dolby Digital and DTS, ensuring high-fidelity audio reproduction for both movies and music. Additionally, it supports 24-bit/192kHz audio playback, which enhances the detail and clarity of sound, making it suitable for both casual listeners and audiophiles.

In terms of video capabilities, the AVR-4802 supports high-quality video formats, including progressive scan for smoother images, and it features multiple video inputs, including S-Video and composite connections. This versatility allows users to connect various devices, such as DVD players and gaming consoles, simplifying the integration of a comprehensive home theater system.

The receiver also comes with advanced DSP (Digital Signal Processing) algorithms that optimize audio output based on the environment, providing an improved listening experience regardless of the room's acoustics. This feature further enhances the AVR-4802's appeal to home theater enthusiasts looking for customizability.

Another outstanding characteristic of the AVR-4802 is its user-friendly interface, featuring a comprehensive on-screen display that simplifies setup and operation. It includes a remote control that offers convenient access to all functionalities, making navigation through various settings intuitive.

Additionally, the AVR-4802 is equipped with multiple digital and analog inputs, which provides flexibility in connecting other audio and video components. The receiver's build quality is also noteworthy, reflecting Denon's attention to detail, ensuring durability and performance.

Overall, the Denon AVR-4802 is a well-rounded A/V receiver that combines power, advanced technologies, and user-friendly features to create an ideal centerpiece for any home theater system, offering an unparalleled entertainment experience for users who appreciate high-quality sound and video.
Top Page Image Contents