Denon AVR-4802 manual Setting the Crossover Frequency, Parameters

Page 20

•Parameters

Large ................Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode.

Small ................Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover Frequency mode is sent to the subwoofer or main speakers selected “Large”.

None…… .........Select this when no speakers are installed.

Yes/No… ..........Select “Yes” when a subwoofer is installed, “No” when a subwoofer is not installed. 2spkrs/1spkr.....Select the number of speakers to be used for the surround back channel.

If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, center and surround speakers.

To take full advantage of the performance of the Home THX certified speaker systems, set the front, center and surround speaker size parameters to “Small” and the subwoofer to “Yes”.

For the majority of speaker system configurations, using the SMALL setting for all five main speakers and Subwoofer On with a connected subwoofer will yield the best results.

When “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”, and when “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.

Selecting the surround speakers for the different surround modes

•At this screen preset the surround speakers to be used in the different surround modes.

1

2

When either “Large” or “Small” has been set for both speakers A and B on the System Setup Menu (when using both A and B surround speakers), the surround speaker setting screen appears.

Select the surround speakers to be used in the different surround modes.

• To select the surround mode

• To select the surround speaker

A: When using surround speakers A

B: When using surround speakers B

A+B: When using both surround speakers A and B

Enter the setting.

•When “Subwoofer” is set to “Yes” or “other speakers” is set to “Small”, the set switches to the Crossover Frequency mode.

•When “Front” is set to “Large” and “Subwoofer” is set to “Yes”, the set switches to the subwoofer mode. (See page 21.)

Speaker type setting when using both surround speakers A and B

If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B. For the “WIDE SCREEN” and “5/7CH STEREO” DSP simulation modes, the surround speakers can be set separately.

Setting the Crossover Frequency

Set the crossover frequency mode according to the speaker system being used.

1

Select the Crossover Frequency mode.

 

To select the Crossover Frequency.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents AVR-4802 Safety Precautions Safety Instructions Table of Contents Before UsingFeatures Connecting the audio components ConnectionsConnecting video components Connecting a TV, DBS/SAT tuner TV or DBS/SATConnecting a video component equipped with S-Video jacks Precaution when using S-jacksConnecting a DVD player DVD in jacks Connecting the antenna terminals FM AntennaConnecting the external input EXT. in jacks Connecting the Multi Source jacksSpeaker Impedance Connecting the speaker cordsSpeaker system connections Connections Surround Speaker Systems aPart Names and Functions Front PanelRemote control unit Setting UP the System MuteSpeaker system layout Surround speaker selector functionBefore setting up the system 6, 7Setting the type of speakers Setting the Crossover Frequency ParametersSetting the Subwoofer mode Assignment of low frequency signal rangeSubwoofer mode Variable 40, 60, 80, 100, 120 HzNon-Flag Source SB ch Output setting Setting the THX Surround EX / DTS-ES Source AutoTHX surround EX/DTS ES Auto Flag Detect Mode Afdm setting Setting the delay time PreparationsSetting the Multi Zone Control Power amplifier assignment function settingVariable 40 dB, 0 dBSetting the channel level Channel Level screen reappears Subwoofer peak limit level setting Setting the Digital In Assignment Setting the on-screen display OSD Auto tuner presetsUsing the remote control unit Remote Control UnitAfter completing system setup Before operating Operating the remote control unit Remote control unit’s jog stickIs called the cursor mode OperationExample CD Input mode selection functionPlaying the input source Example Stereo Adjusting the sound quality toneAfter starting playback Listening over headphones Switching the surround speakersTurning the sound off temporarily muting Checking the currently playing program source, etcRecording Dolby Digital and DTS multichannel sources Playing one source while recording another REC OUT modeMulti-source recording/playback Multi indicator lights DisplayPlayback using the external input EXT. in jacks Pure Direct mode Direct modeStereo mode Playing audio sources CDs and DVDsMulti-source and multi-zone playback Multi Room Music Entertainment SystemWhen using the PRE OUT Multi Zone terminals When using the SB/MULTI speaker terminalsPress the CH VOL button and select SurroundBefore playing with the surround function Fader function Press the CH VOL button, and selectPlaying modes for different sources THX Dscrt 6.1, MtrxSurround parameters q THX Surround EX / Home THX Cinema modeAfdm Auto Flag Detect Mode Checking the input signal Select the input source Surround parameters w Cinema EQ. Cinema Equalizer COMP. Dynamic Range CompressionLFE Low frequency Effect Dialogue NormalizationDolby Surround Pro Logic II mode Dolby PRO LogicCinema EQ setting PANORAMA/DIMENSION/CENTER Width setting Default settingSurround parameters e Pro Logic II Mode Dimension ControlDTS Neo6 mode Play a program source Disolay the Surround Parameter MenuPersonal Memory Plus Surround modes and their featuresDenon Original Surround Modes DSP surround simulation Tone control setting Select ToneSurround parameters r EffectSurround modes and parameters Listening to the Radio Auto tuningManual tuning Preset memory Checking the preset stationsRemote control unit Main unitInitialization of the Microprocessor Recalling preset stationsLast Function Memory Troubleshooting Types of multi-channel signals Additional InformationOptimum surround sound for different sources Movie audioSurround back speakers Number of surround back speakersSpeaker setting examples When using different surround speakers for movies and music When not using surround back speakersSurround Dolby Surround Dolby Digital Dolby Surround AC-3Dolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDTS compatible media and playback methods Dolby Pro LogicDTS Digital Surround DTS-ES Extended Surround TM DTS-ESTMDiscreteDTS-ESTMMatrix DTS Neo6TM surroundDTS 96/24 Home THX Cinema SurroundRe-EqualizationTM Timbre MatchingTMTHX Surround EX Surround modes and parameters Specifications Audio section14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan

AVR-4802 specifications

The Denon AVR-4802 is a premium home theater receiver that has garnered a reputation for delivering exceptional audio and video performance. Launched as part of Denon's celebrated line of A/V receivers, the AVR-4802 exemplifies the brand's commitment to quality and innovation in the realm of home entertainment.

One of the key features of the AVR-4802 is its robust amplification capability. It provides a powerful 110 watts per channel, allowing users to enjoy a dynamic and impactful soundstage. The receiver is equipped with multiple channels, which facilitates a fully immersive surround sound experience, accommodating various speaker configurations, including traditional 5.1 and more advanced setups like 7.1 surround sound.

The AVR-4802 incorporates cutting-edge surround sound processing technologies, including Dolby Digital and DTS, ensuring high-fidelity audio reproduction for both movies and music. Additionally, it supports 24-bit/192kHz audio playback, which enhances the detail and clarity of sound, making it suitable for both casual listeners and audiophiles.

In terms of video capabilities, the AVR-4802 supports high-quality video formats, including progressive scan for smoother images, and it features multiple video inputs, including S-Video and composite connections. This versatility allows users to connect various devices, such as DVD players and gaming consoles, simplifying the integration of a comprehensive home theater system.

The receiver also comes with advanced DSP (Digital Signal Processing) algorithms that optimize audio output based on the environment, providing an improved listening experience regardless of the room's acoustics. This feature further enhances the AVR-4802's appeal to home theater enthusiasts looking for customizability.

Another outstanding characteristic of the AVR-4802 is its user-friendly interface, featuring a comprehensive on-screen display that simplifies setup and operation. It includes a remote control that offers convenient access to all functionalities, making navigation through various settings intuitive.

Additionally, the AVR-4802 is equipped with multiple digital and analog inputs, which provides flexibility in connecting other audio and video components. The receiver's build quality is also noteworthy, reflecting Denon's attention to detail, ensuring durability and performance.

Overall, the Denon AVR-4802 is a well-rounded A/V receiver that combines power, advanced technologies, and user-friendly features to create an ideal centerpiece for any home theater system, offering an unparalleled entertainment experience for users who appreciate high-quality sound and video.
Top Page Image Contents