Denon AVR-4802 manual Safety Precautions

Page 2

2SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTERODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’ AU FOND.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

2NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION

•Avoid high temperatures.

Allow for sufficient heat dispersion when installed on a rack.

•Eviter des températures élevées.

Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère.

•Handle the power cord carefully.

Hold the plug when unplugging the cord.

•Manipuler le cordon d’alimentation avec précaution.

Tenir la prise lors du débranchement du cordon.

•Keep the set free from moisture, water, and dust.

•Protéger l’appareil contre l’humidité, l’eau et la poussière.

•Unplug the power cord when not using the set for long periods of time.

•Débrancher le cordon d’alimentation lorsque l’appareil n’est pas utilisé pendant de longues périodes.

*(For sets with ventilation holes)

•Do not obstruct the ventilation holes.

•Ne pas obstruer les trous d’aération.

•Do not let foreign objects in the set.

•Ne pas laisser des objets étrangers dans l’appareil.

•Do not let insecticides, benzene, and thinner come in contact with the set.

•Ne pas mettre en contact des insecticides, du benzène et un diluant avec l’appareil.

•Never disassemble or modify the set in any way.

•Ne jamais démonter ou modifier l’appareil d’une manière ou d’une autre.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents AVR-4802 Safety Precautions Safety Instructions Table of Contents Before UsingFeatures Connecting the audio components ConnectionsConnecting video components Connecting a TV, DBS/SAT tuner TV or DBS/SATConnecting a video component equipped with S-Video jacks Precaution when using S-jacksConnecting a DVD player DVD in jacks Connecting the antenna terminals FM AntennaConnecting the external input EXT. in jacks Connecting the Multi Source jacksSpeaker Impedance Connecting the speaker cordsSpeaker system connections Connections Surround Speaker Systems aPart Names and Functions Front PanelRemote control unit Setting UP the System MuteSpeaker system layout Surround speaker selector functionBefore setting up the system 6, 7Setting the type of speakers Setting the Crossover Frequency ParametersSubwoofer mode Setting the Subwoofer modeAssignment of low frequency signal range Variable 40, 60, 80, 100, 120 HzNon-Flag Source SB ch Output setting Setting the THX Surround EX / DTS-ES Source AutoTHX surround EX/DTS ES Auto Flag Detect Mode Afdm setting Setting the delay time PreparationsSetting the Multi Zone Control Power amplifier assignment function settingVariable 40 dB, 0 dBSetting the channel level Channel Level screen reappears Subwoofer peak limit level setting Setting the Digital In Assignment Setting the on-screen display OSD Auto tuner presetsUsing the remote control unit Remote Control UnitAfter completing system setup Is called the cursor mode Before operating Operating the remote control unitRemote control unit’s jog stick OperationExample CD Input mode selection functionPlaying the input source Example Stereo Adjusting the sound quality toneAfter starting playback Turning the sound off temporarily muting Listening over headphonesSwitching the surround speakers Checking the currently playing program source, etcRecording Dolby Digital and DTS multichannel sources Playing one source while recording another REC OUT modeMulti-source recording/playback Multi indicator lights DisplayPlayback using the external input EXT. in jacks Stereo mode Pure Direct modeDirect mode Playing audio sources CDs and DVDsMulti-source and multi-zone playback Multi Room Music Entertainment SystemWhen using the PRE OUT Multi Zone terminals When using the SB/MULTI speaker terminalsPress the CH VOL button and select SurroundBefore playing with the surround function Fader function Press the CH VOL button, and selectPlaying modes for different sources THX Dscrt 6.1, MtrxSurround parameters q THX Surround EX / Home THX Cinema modeAfdm Auto Flag Detect Mode Checking the input signal Select the input source LFE Low frequency Effect Surround parameters w Cinema EQ. Cinema EqualizerCOMP. Dynamic Range Compression Dialogue NormalizationDolby Surround Pro Logic II mode Dolby PRO LogicSurround parameters e Pro Logic II Mode Cinema EQ settingPANORAMA/DIMENSION/CENTER Width setting Default setting Dimension ControlDTS Neo6 mode Play a program source Disolay the Surround Parameter MenuPersonal Memory Plus Surround modes and their featuresDenon Original Surround Modes DSP surround simulation Tone control setting Select ToneSurround parameters r EffectSurround modes and parameters Listening to the Radio Auto tuningManual tuning Remote control unit Preset memoryChecking the preset stations Main unitInitialization of the Microprocessor Recalling preset stationsLast Function Memory Troubleshooting Optimum surround sound for different sources Types of multi-channel signalsAdditional Information Movie audioSurround back speakers Number of surround back speakersSpeaker setting examples When using different surround speakers for movies and music When not using surround back speakersDolby Digital and Dolby Pro Logic SurroundDolby Surround Dolby Digital Dolby Surround AC-3 Dolby Digital compatible media and playback methodsDTS compatible media and playback methods Dolby Pro LogicDTS Digital Surround DTS-ESTMMatrix DTS-ES Extended Surround TMDTS-ESTMDiscrete DTS Neo6TM surroundRe-EqualizationTM DTS 96/24Home THX Cinema Surround Timbre MatchingTMTHX Surround EX Surround modes and parameters Specifications Audio section14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan

AVR-4802 specifications

The Denon AVR-4802 is a premium home theater receiver that has garnered a reputation for delivering exceptional audio and video performance. Launched as part of Denon's celebrated line of A/V receivers, the AVR-4802 exemplifies the brand's commitment to quality and innovation in the realm of home entertainment.

One of the key features of the AVR-4802 is its robust amplification capability. It provides a powerful 110 watts per channel, allowing users to enjoy a dynamic and impactful soundstage. The receiver is equipped with multiple channels, which facilitates a fully immersive surround sound experience, accommodating various speaker configurations, including traditional 5.1 and more advanced setups like 7.1 surround sound.

The AVR-4802 incorporates cutting-edge surround sound processing technologies, including Dolby Digital and DTS, ensuring high-fidelity audio reproduction for both movies and music. Additionally, it supports 24-bit/192kHz audio playback, which enhances the detail and clarity of sound, making it suitable for both casual listeners and audiophiles.

In terms of video capabilities, the AVR-4802 supports high-quality video formats, including progressive scan for smoother images, and it features multiple video inputs, including S-Video and composite connections. This versatility allows users to connect various devices, such as DVD players and gaming consoles, simplifying the integration of a comprehensive home theater system.

The receiver also comes with advanced DSP (Digital Signal Processing) algorithms that optimize audio output based on the environment, providing an improved listening experience regardless of the room's acoustics. This feature further enhances the AVR-4802's appeal to home theater enthusiasts looking for customizability.

Another outstanding characteristic of the AVR-4802 is its user-friendly interface, featuring a comprehensive on-screen display that simplifies setup and operation. It includes a remote control that offers convenient access to all functionalities, making navigation through various settings intuitive.

Additionally, the AVR-4802 is equipped with multiple digital and analog inputs, which provides flexibility in connecting other audio and video components. The receiver's build quality is also noteworthy, reflecting Denon's attention to detail, ensuring durability and performance.

Overall, the Denon AVR-4802 is a well-rounded A/V receiver that combines power, advanced technologies, and user-friendly features to create an ideal centerpiece for any home theater system, offering an unparalleled entertainment experience for users who appreciate high-quality sound and video.
Top Page Image Contents