Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

1.	Read Instructions – All the safety and operating instructions
	should be read before the product is operated.
2.	Retain Instructions – The safety and operating instructions
	should be retained for future reference.
3.	Heed Warnings – All warnings on the product and in the
	operating instructions should be adhered to.
4.	Follow Instructions – All operating and use instructions
	should be followed.
5.	Cleaning – Unplug this product from the wall outlet before
	cleaning. Do not use liquid cleaners or aerosol cleaners.
6.	Attachments – Do not use attachments not recommended
	by the product manufacturer as they may cause hazards.
7.	Water and Moisture – Do not use this product near water –
	for example, near a bath tub, wash bowl, kitchen sink, or
	laundry tub; in a wet basement; or near a swimming pool;
	and the like.
8.	Accessories – Do not place this product on an unstable cart,
	stand, tripod, bracket, or table. The product may fall,
	causing serious injury to a child or adult, and serious
	damage to the product. Use only with a cart, stand, tripod,
	bracket, or table recommended by the manufacturer, or
	sold with the product. Any mounting of the product should

13.Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

15. Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode. See Figure A.

16. Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line

surges.

17. Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other

CAUTION:

1.Handle the power supply cord carefully

Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord.

2.Do not open the top cover

In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer.

3.Do not place anything inside

Do not place metal objects or spill liquid inside the CD player. Electric shock or malfunction may result.

Please, record and retain the Model name and serial number of your set shown on the rating label.

Model No. DN-S3000

Serial No.

NOTE:

This CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5 °C (41 °F) –35 °C (95 °F).

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

LABELS (for U.S.A. model only)

CERTIFICATION

THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

follow the manufacturer’s instructions, and should use a

mounting accessory

recommended by the

manufacturer.

9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10. Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should not

be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

11. Power Sources – This product should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your product dealer or local power

company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

12. Grounding or Polarization – This product may be equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact

electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
18. Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
19. Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the product.
20. Servicing – Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
21. Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a)	When the power-supply cord or plug is damaged,
b)	If liquid has been spilled, or objects have fallen into the
	product,
c)	If the product has been exposed to rain or water,
d)	If the product does not operate normally by following
	the operating instructions. Adjust only those controls
	that are covered by the operating instructions as an
	improper adjustment of other controls may result in
	damage and will often require extensive work by a
	qualified technician to restore the product to its normal
	operation,
e)	If the product has been dropped or damaged in any way,

	,,CLASS 1
	LASER PRODUCT,,
ADVARSEL:	USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
	SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
	UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS!	LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
	KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
	ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
	YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE LASERSÄTEILYLLE.
VARNING–	OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA
	BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN
	UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING SOM
	ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL

ELECTRICAL CODEANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250, PART H)

NEC - NATIONAL ELECTRICAL CODE

	and
	f) When the product exhibits a distinct change in
	performance – this indicates a need for service.
22.	Replacement Parts – When replacement parts are required,
	be sure the service technician has used replacement parts
	specified by the manufacturer or have the same
	characteristics as the original part.	Unauthorized
	substitutions may result in fire, electric shock, or other
	hazards.
23.	Safety Check – Upon completion of any service or repairs
	to this product, ask the service technician to perform safety
	checks to determine that the product is in proper operating
	condition.
24.	Wall or Ceiling Mounting – The product should be mounted
	to a wall or ceiling only as recommended by the
	manufacturer.
25.	Heat – The product should be situated away from heat
	sources such as radiators, heat registers, stoves, or other
	products (including amplifiers) that produce heat.