Hotpoint MWHZ33 manual Maintenance, Cause/Solution

5.2 - MAINTENANCE

Before calling Service for assistance, check through the following list, there may be nothing wrong:

PROBLEM			CAUSE/SOLUTION
		•	The door is not closed properly.
The appliance does not work		•	The plug is not correctly inserted.
		•	No power at the socket
			No power at the socket (check the fuse box)
Condensation on the work surface, inside the		•	When food is cooked which contains water it is quite normal
			for the steam which is generated inside the oven to escape and
oven or around the door.			condense inside the oven, on the cooking surface or around the
			doorframe.
		•	Do not turn the oven on without food in Microwave and
Sparks inside the oven			Combined cooking modes.
		•	Do not use metal containers for the above cooking modes or
			bags or packets with metal parts.
The food does not heat or cook properly		•	Select the correct cooking mode or reduce the cooking time.
		•	The food has not been completely defrosted before being
			cooked.
The food burns		•	Select the correct cooking mode or reduce the cooking time.
The food does not cook evenly		•	Stir the food during cooking. Remember that food cooks bet-
			ter when cut in evenly-sized pieces.
		•	The turntable does not rotate.
		•	Make sure the pasta support is correctly inserted in the bot-
PASTA mode cannot be set, PASTA is	not		tom of the oven and that the pins correspond to the relative
			holes.
displayed
			The container must be correctly positioned over the pasta
			support.

NOTE: The oven may be used safely even if the light bulb is not working. Contact an authorised Service Centre for bulb replacement.

33