Wells WVOC-4HF, WVOC-4HS Grease Trough and Grease CUP Installation, Oven Rack Installation

Page 14

INSTALLATION (continued)

WARNING

Slipping / Falling

Hazard

Spilled Oil

DO NOT OPERATE UNLESS

THE GREASE CUP IS

INSTALLED.

Oil and moisture will drip onto the floor and falls may result. Death or serious injury may result from slipping and falling

CAUTION:

Burn Hazard

GREASE TROUGH AND GREASE CUP INSTALLATION

1.Install the GREASE TROUGH into the brackets below the grease baffle.

2.Install the GREASE CUP on the right side of the unit, directly below the grease trough.

HOTPLATE DRIP PAN INSTALLATION (SPIRAL HEATING ELEMENTS ONLY)

1. Lift / rotate the elements up.

2.

Install a drip

 

Element Support

 

 

 

pan in each

 

Drip Pan

 

element cutout.

 

Heating Element

 

 

 

3.

Install an

 

(Lifted)

 

element

 

 

 

support into

 

 

 

each drip pan.

Fig. 8

Hotplate Drip Pan Installation

 

The ends of the

 

 

 

support set in the indentations in the pan. The support’s center boss must be on the top.

4. Rotate elements back into place.

OVEN RACK INSTALLATION

DO NOT OPERATE UNLESS

GREASE TROUGH

IS INSTALLED. Moisture will drip into the hot cooking surface, causing splattering of hot liquids. Serious injury can result from contact with hot splatter.

1.Install fan baffle. Use care around the fan. The blades are sharp.

2.Install one rack support on the fan baffle, and one rack support on the left wall of the oven cavity.

3.Install racks as needed for the product being prepared.

Fig. 9 Oven Rack Installation

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 506 Important do not Discard this ManualLimited Warranty Statement Introduction Table of ContentsSpecifications Features & Operating Controls Ventilator Section Description CommentFeatures & Operating Controls Convection Oven Section Controls Ventilator Section ControlsCooktop Section Controls Precautions and General Information Electric Shock hazardOperational Notes STDUnpacking & Inspection InstallationSetup This is Responsibility Installer Service Technician Installation NotesElectrical Installation Electric Shock HazardAuthority Having Jurisdiction Fire Suppression System InstallationFire Hazard Filters Installation Filter InstallationOven Rack Installation Grease Trough and Grease CUP InstallationHotplate Drip PAN Installation Spiral Heating Elements only Do not Operate Unless Grease CUP is InstalledPRE-FILTER Element Ventilator OperationOperation Bread Products Suggested Cooking TimesConvection Oven Product Temp Time Number Minutes Racks PastriesConvection Oven Operating Instructions Manual Cook ModeProgram Cook Mode Temperature Offset Mode Burn HazardHotplate Operating Instructions Cooking with Your HotplateCleaning Instructions Convection Oven Cleaning InstructionsFrequency Hotplate Cleaning InstructionsPrecautions ToolsPreparation Ventilator Section Cleaning InstructionsCleaning No Part of the Appliance will Heat Troubleshooting SuggestionsConvection Oven Controller Error Codes Hotplate will not HeatLatch Adjustment Maintenance InstructionsFAN Cleaning Maintenance Instructions Hinge AdjustmentTemperature Calibration Maintenance Schedules Fire HazardPage Page Ansul Health Hazards Page Description Service Parts & Service
Related manuals
Manual 34 pages 8.39 Kb

WVOC-4HF, WVOC-4HC, WVOC-4HS specifications

The Wells WVOC-4HS is a cutting-edge vaporizer designed to meet the needs of various industrial applications, particularly in the pharmaceutical and chemical sectors. Known for its exceptional performance and reliability, the WVOC-4HS stands out with its innovative features and advanced technologies.

One of the main features of the Wells WVOC-4HS is its high-efficiency heating system. Utilizing advanced thermal conduction methods, this vaporizer ensures rapid and uniform heating of the material, minimizing any potential degradation while maximizing output. Its robust design supports a variety of materials, providing versatility in application.

The WVOC-4HS is equipped with a user-friendly digital control interface that allows for precise temperature regulation and monitoring. This feature is crucial in industries where specific temperature thresholds must be maintained for optimal safety and efficacy. The control system can be integrated with existing automated systems, enabling seamless operation and consistent performance.

Another important characteristic of the Wells WVOC-4HS is its safety protocols. The design incorporates multiple safety features, including over-temperature protection and pressure relief valves. These systems are designed to prevent accidents and ensure a safe operating environment for all personnel.

The vaporizer’s construction is also noteworthy, as it is made from high-grade, corrosion-resistant materials. This not only increases the longevity of the device but also ensures that it can withstand various chemicals, making it a dependable choice for rigorous industrial use. This durable build quality is essential for maintaining performance in demanding environments.

Additionally, the Wells WVOC-4HS boasts a compact design that allows for easy installation and integration into existing setups. Its lightweight architecture aids in reducing space requirements without compromising on performance.

In summary, the Wells WVOC-4HS is a reliable and efficient vaporizer that combines high-efficiency heating, advanced digital controls, robust safety features, and durable construction. Its versatility makes it an ideal choice for industries that require precise vaporization processes, ensuring optimal performance in every application. Whether used in pharmaceutical production or chemical processing, the WVOC-4HS exemplifies technological advancement and reliability in vaporization.
Top Page Image Contents