Maintenance Instructions, Hinge Adjustment

MAINTENANCE INSTRUCTIONS (continued)

C. HINGE ADJUSTMENT

1.The hinges provide the pivot for the door, allow for height adjustment and alignment so that the door closes properly on the gasket.

2.To access the hinge adjustments:

a.Remove the grease tray. Remove the upper trim panel by removing the four screws at the ends of the panel. The trim panel / grease tray support assembly will then pull straight out.

b.Remove the bottom trim panel by removing the four screws at the ends of the panel, and by loosening the two screws holding the bottom door gasket. The panel will then pull straight out.

3.The door should be approximately centered between the upper and lower lips of the cabinet. Adjust the door for height:

a.The hinge sleeve acts as a jam nut for the height adjuster.

b.The top and bottom clearances should be approximately equal. If necessary, loosen the hinge sleeve and turn the height adjustment nut until the required clearances are achieved.

c.Retighten the hinge sleeve.

4.Check fore-and-aft adjustment in two places on the hinge-side of the door. Use a piece of paper (such as a dollar bill) between the inner surface of the door and the door gasket. The paper should be definitely held, but should be able to be pulled out with just a slight drag.

5.To adjust a top or bottom hinge:

a.Loosen the holding bolts.

b.Tighten or loosen the adjusting bolt as needed to achieve the proper vertical clearances.

c.Retighten the holding bolts.

d.Recheck the clearances. Recheck the tightness of the bolts.

6.Reassemble the trim panels. Remember to retighten the screws for the lower gasket

CLEARANCES

EQUAL

APPROXIMATELY

TOP PANEL

CHECK ALIGNMENT

BOTTOM

PANEL

	HINGE SLEEVE
HINGE BRACKET	HINGE BRACKET
HOLDING	HOLDING
BOLTS	BOLTS
DOOR PIVOT	HEIGHT
ADJUSTING	ADJUSTMENT
BOLT	ADJUSTING
	ADJUSTING
	BOLT

WVOC-4HF, WVOC-4HC, WVOC-4HS specifications

The Wells WVOC-4HS is a cutting-edge vaporizer designed to meet the needs of various industrial applications, particularly in the pharmaceutical and chemical sectors. Known for its exceptional performance and reliability, the WVOC-4HS stands out with its innovative features and advanced technologies.

One of the main features of the Wells WVOC-4HS is its high-efficiency heating system. Utilizing advanced thermal conduction methods, this vaporizer ensures rapid and uniform heating of the material, minimizing any potential degradation while maximizing output. Its robust design supports a variety of materials, providing versatility in application.

The WVOC-4HS is equipped with a user-friendly digital control interface that allows for precise temperature regulation and monitoring. This feature is crucial in industries where specific temperature thresholds must be maintained for optimal safety and efficacy. The control system can be integrated with existing automated systems, enabling seamless operation and consistent performance.

Another important characteristic of the Wells WVOC-4HS is its safety protocols. The design incorporates multiple safety features, including over-temperature protection and pressure relief valves. These systems are designed to prevent accidents and ensure a safe operating environment for all personnel.

The vaporizer’s construction is also noteworthy, as it is made from high-grade, corrosion-resistant materials. This not only increases the longevity of the device but also ensures that it can withstand various chemicals, making it a dependable choice for rigorous industrial use. This durable build quality is essential for maintaining performance in demanding environments.

Additionally, the Wells WVOC-4HS boasts a compact design that allows for easy installation and integration into existing setups. Its lightweight architecture aids in reducing space requirements without compromising on performance.

In summary, the Wells WVOC-4HS is a reliable and efficient vaporizer that combines high-efficiency heating, advanced digital controls, robust safety features, and durable construction. Its versatility makes it an ideal choice for industries that require precise vaporization processes, ensuring optimal performance in every application. Whether used in pharmaceutical production or chemical processing, the WVOC-4HS exemplifies technological advancement and reliability in vaporization.