Troubleshooting Suggestions

A. NO PART OF THE APPLIANCE WILL HEAT

1.Verify that appropriate cooking controls are ON.

2.Check electrical supply. Make sure service breaker is ON.

3.Make sure all filters are properly installed, and that no filter warning lights are lit.

4.Possible improper service wiring: Have a licensed electrician verify that all three legs of the 3ø service are properly connected

(i.e. Leg 1 to L1, Leg 2 to L2, Leg 3 to L3), and that all three legs are of the proper voltage and phase.

5.Ansul® Fire Suppression System not charged.

B. HOTPLATE WILL NOT HEAT

1.Verify that associated temperature control is set to the desired temperature.

2.Possible internal component damage: Have unit serviced by an Authorized Wells Service Agency.

C.CONVECTION OVEN WILL NOT HEAT See Error Codes diagram at right

1.Verify that the oven switch is ON and that the temperature control is set to the desired temperature.

2.Verify that the door is closed.

3.Hi-Limit control may have tripped: Allow unit to cool; Hi-Limit will reset automatically.

4.Blown fuse(s) (item 40): Correct cause of over-current and replace fuses with fuses having the same configuration and ratings.

5.Possible internal component damage: Have unit serviced by an Authorized Wells Service Agency.

D. CONVECTION OVEN FAN WILL NOT RUN

1.Verify that the oven switch is set to ON or FAN.

2.Verify that the fan switch is set to either HIGH or LOW.

3.Hi-Limit control may have tripped: Allow unit to cool; Hi-Limit will reset automatically.

4.Blown fuse(s): Correct cause of over-current and replace fuses with fuses having the same configuration and ratings.

5.Possible internal component damage: Have unit serviced by an Authorized Wells Service Agency.

CAUTION:

Electrical Shock

Hazard

Removal of any cabinet panel will result in exposed electrical circuits. Any procedure requiring the removal of any cabinet panel must be performed by a qualified technician only.

CONVECTION OVEN

CONTROLLER

ERROR CODES

F1 Relay closed or relay ohms low when not cooking

F2 Actual temperature 60ºF

(±35ºF) greater than

T-SET MAX

F3 Open temperature sensor

F4 Shorted temperature sensor

F5 Relay open or relay ohms high when cooking

F6 No 60 Hz (Cycles per second other than 60 Hz detected)

Have unit serviced by an Authorized Wells Service Agency.

NOTE: There are no user serviceable components in the appliance. In all cases of damage or component malfunction, contact your Authorized Wells Service Agency for repairs.

WVOC-4HF, WVOC-4HC, WVOC-4HS specifications

The Wells WVOC-4HS is a cutting-edge vaporizer designed to meet the needs of various industrial applications, particularly in the pharmaceutical and chemical sectors. Known for its exceptional performance and reliability, the WVOC-4HS stands out with its innovative features and advanced technologies.

One of the main features of the Wells WVOC-4HS is its high-efficiency heating system. Utilizing advanced thermal conduction methods, this vaporizer ensures rapid and uniform heating of the material, minimizing any potential degradation while maximizing output. Its robust design supports a variety of materials, providing versatility in application.

The WVOC-4HS is equipped with a user-friendly digital control interface that allows for precise temperature regulation and monitoring. This feature is crucial in industries where specific temperature thresholds must be maintained for optimal safety and efficacy. The control system can be integrated with existing automated systems, enabling seamless operation and consistent performance.

Another important characteristic of the Wells WVOC-4HS is its safety protocols. The design incorporates multiple safety features, including over-temperature protection and pressure relief valves. These systems are designed to prevent accidents and ensure a safe operating environment for all personnel.

The vaporizer’s construction is also noteworthy, as it is made from high-grade, corrosion-resistant materials. This not only increases the longevity of the device but also ensures that it can withstand various chemicals, making it a dependable choice for rigorous industrial use. This durable build quality is essential for maintaining performance in demanding environments.

Additionally, the Wells WVOC-4HS boasts a compact design that allows for easy installation and integration into existing setups. Its lightweight architecture aids in reducing space requirements without compromising on performance.

In summary, the Wells WVOC-4HS is a reliable and efficient vaporizer that combines high-efficiency heating, advanced digital controls, robust safety features, and durable construction. Its versatility makes it an ideal choice for industries that require precise vaporization processes, ensuring optimal performance in every application. Whether used in pharmaceutical production or chemical processing, the WVOC-4HS exemplifies technological advancement and reliability in vaporization.