Black & Decker CM5050C Brewing Coffee, Regular Strong, Brewing 1 to 4 Cups, Sneak-A-Cupfeature

Page 5

BREWING COFFEE

Note: It is not necessary to set the clock to brew coffee unless you want to use DELAYED BREWING.

1.Open one-piece cover.

2.Fill water reservoir with desired amount of cold tap water. Do not exceed the 12-cup (MAX) level on the water reservoir.

Important: There is an overflow hole at the back of the coffeemaker. Be careful not to overfill the water reservoir to avoid leaking onto the counter or work surface.

3.Place permanent filter or an 8 –12 cup basket-style paper filter into the removable filter basket, making sure the filter is centered.

4.Add desired amount of ground coffee.

5.Insert brew basket into brew basket holder following directions in GETTING STARTED.

6.Close one-piece cover.

7.Make sure carafe lid is properly attached to the empty carafe. Close the lid.

Note: Coffee may overflow if carafe lid is not properly placed.

8.Place empty carafe on the “Keep Hot” carafe plate.

9.Plug cord into an outlet.

10.Select the brew strength desired by pressing the BREW

STRENGTH button and selecting one of the 2 levels (J):

REGULAR

STRONG

 

Note: During first use, your coffeemaker is set to brew at

J

REGULAR brew strength.

 

11. Press ON/OFF button; blue light around the button turns on. Brewing begins OR for delayed brewing set the AUTO function before pressing the ON/OFF button. (See below for DELAYED BREWING.) (K).

K

12.When coffee stops flowing into carafe, the brew cycle is complete.

13.Once coffee grounds have cooled, carefully open one-piece cover and, using basket handle, remove and discard used grounds. Close one-piece cover.

14.The coffeemaker will keep brewed coffee hot for 2 hours and then automatically turn off.

15.To turn off the coffeemaker at any time press the ON/OFF button.

16.Unplug appliance when not in use.

BREWING 1 TO 4 CUPS

Note: This feature slows down the brewing to extract the best flavor when brewing a small amount of coffee.

1.Add the appropriate amount of water for the number of cups to be brewed (from 1 – 4)

2.Fill the permanent filter or paper filter with desired amount of coffee grounds.

3.Press the 1 – 4 CUP button. The blue light will turn on around the button and a small coffee cup icon will appear on the left side of the display (L).

Note: BREW STRENGTH cannot be selected in this mode.

Coffee will be brewed at regular strength.

L

SNEAK-A-CUP®FEATURE

The Sneak-A-Cup®feature allows you to pour a cup of coffee from the carafe while the coffee is brewing. When the carafe is removed the brewing process is paused. Simply replace the carafe on the “Keep Hot” carafe plate within 30 seconds and brewing resumes.

Note: If the carafe is not replaced within 30 seconds the filter basket may overflow.

KEEPING COFFEE HOT

Once the coffee has brewed, the coffeemaker will keep the “Keep Hot” carafe plate hot for up to 2 hours, and then shut off automatically. To turn the “Keep Hot” carafe plate off, simply press the ON/OFF button.

DELAYED BREWING

1.Follow steps 1 through 9 under BREWING COFFEE.

2.Make sure clock has been set to correct time of day.

3.Press the PROG/AUTO button. The blue light around the PROG/AUTO button will flash several times and a clock icon will appear and flash in the top left corner of the display.

4.The digital clock will display 12:00 or the previous preset delayed brewing start time.

Note: If the coffeemaker has not been unplugged the last delayed brewing time will appear on the digital display.

5.To change the time: Immediately press HOUR button until the desired correct time appears on the display. Repeat with the MIN button.

Note: If the hour is not changed before the PROG/AUTO light stops flashing the clock will revert to correct time of day. You must press the PROG/AUTO button again and re-enter the desired delayed brewing time.

6.Press the PROG/AUTO button to activate the delayed brewing. The blue light around the PROG/AUTO button and the clock icon on the left of the display will both be constant.

7.To check the preset auto time, press PROG/AUTO button: the PROG/AUTO button light and the clock on the digital display will flash and the time selected for delayed brewing will be displayed. Press PROG/AUTO button to accept or simply wait several seconds for the display to the correct time of day.

8.To cancel delayed brewing, press the ON/OFF button to brew coffee immediately or press the ON/OFF button again to turn the coffeemaker OFF. All lights will turn off.

ENGLISH

8

9

Image 5
Contents Important / Importante CustomerCare LineImportant Safeguards Control Panel How to Use Delayed Brewing SNEAK-A-CUPFEATUREBrewing Coffee Regular StrongCleaning Care and CleaningCleaning with Vinegar Coffee Brewing TipsCoffee is not brewing Water reservoir might Problem Possible Cause SolutionCarafe Care Risk of Fire or Electric SHOCK. do not Open Need HELP?Importantes Consignes DE Sécurité Couvercle monopièce Tableau DE CommandeUtilisation Infusion DU Café Mode ChaleurMoyennement Corsé Regular Corsé Strong Infusion DE 1 À 4 Tasses DE CaféConseils Relatifs À L’INFUSION DU Café Entretien et nettoyageUn technicien qualifié NettoyageNettoyage Avec DU Vinaigre Problème Cause Possible SolutionEntretien DE LA Carafe VinaigrePage ÉLECTRIQUES. NE PAS Ouvrir De service UtoriséCopyright 2010 Applica Consumer Products, Inc

CM5050C, CM5050CUC specifications

The Black & Decker CM5050CUC and CM5050C are advanced coffee makers designed for coffee enthusiasts who appreciate convenience and quality brewing. These models present a perfect blend of functionality and modern design, ensuring ease of use while delivering rich flavors.

One of the standout features of the CM5050 series is the 12-cup capacity. This makes it ideal for families, gatherings, or office use, allowing users to brew enough coffee for multiple servings without constant refilling. The carafe is constructed from durable glass, designed to retain heat effectively, ensuring your coffee stays warm for an extended period.

Both models boast a programmable timer, allowing users to set their brews in advance. By simply setting the desired brewing time the night before, you can wake up to the invigorating aroma of freshly brewed coffee. The intuitive control panel is user-friendly, guiding users through the easy programming process, making these machines accessible even to the most novice coffee drinkers.

The CM5050CUC includes a unique feature known as the brew pause system. This allows you to pause the brewing process, permitting you to pour a cup of coffee before the brewing cycle has completed. This is particularly useful for those who need their coffee fix quickly in the mornings.

Another significant characteristic is the built-in water filtration system found in both models, which ensures the purity of the water used for brewing. This feature highlights Black & Decker's commitment to enhancing the coffee's flavor profile by reducing impurities that can affect taste. Additionally, the powerful brewing system ensures fast brewing time without compromising the strength of the coffee.

The CM5050 series is designed with an easy-to-clean in mind. The removable filter basket and the dishwasher-safe components ensure that maintenance is straightforward, encouraging regular use.

Both the CM5050CUC and CM5050C models embody Black & Decker’s reputation for high-quality kitchen appliances. They bring innovation and practicality to your daily brewing routine, making them a worthwhile addition to any coffee lover's kitchen.