Xantech mrc88 MRC88 Keypad Feature Descriptions, MRC88 Keypad Front Features

Model MRC88 Page: 17

MRC88 KEYPAD FEATURE DESCRIPTIONS

7 6 5

3

2

4

11	8
12	9

13 14 10

1

Figure 4 – The Model MRC88 Keypad – Front Panel Features and Functions

MRC88 KEYPAD - FRONT FEATURES:

1.MRC88 Keypad.

2.Power. Turns the zone ON and OFF. Can be programmed with IR codes or sequences.

3.IR Sensor. Receives IR from hand-held remotes to control both source components and the MRC88 system. A Programmable Learning Remote such as the Xantech URC2 is recommended for integrating the IR commands of the MRC88 and source components into a single controller. Compatible with most brands of remote controls, though some may not be programmable and will therefore only control the source components.

4.Status Indicator LED. Will indicate zone/system status and will flash as IR is received at the IR Sensor. These indicators, one for each Keypad, provide the following Information:

a)LED Off = Zone OFF

b)Steady Green = Zone ON

c)Slow Green Blink = Zone MUTE

© 2003 Xantech Corporation