MAINTENANCE
WARNING: THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE OVEN.
WARNING: DISCONNECT THE ELECTRICAL SUPPLY BEFORE PERFORMING ANY MAINTENANCE ON THE OVEN.
Do not remove the oven covers or attempt to open the control cabinet. Doing so will void the warranty. There are no user serviceable parts inside.
INSPECTING THE OVEN
At least once each day, when the oven is cool, visually inspect the inside of the oven. Make sure both lamp shields are in place, clean, and unbroken. Make sure there are no obvious signs of damaged, worn, or broken parts.
FUSES
There are two replaceable fuses located on the back of the oven (Fig. 6). Replace these fuses only with Class CC 3 Amp Fuses.
CIRCUIT PROTECTORS
There are two resettable circuit protectors located on the back of the oven (Fig. 6). A tripped protector is indicated by the reset button sticking out. To reset the protector, press the button.
Fuses
Blower
Circuit
Protectors
#1
#2
OVEN REAR
Fig. 6
LAMP REPLACEMENT
All lamps MUST be replaced by your local Hobart service representative.
– 21 –