DISPLAY | — The display screen, located at the top of the control panel provides a constant indication | |
|
| of the oven status. It is also used for programming the oven and for the display of |
|
| information and diagnostic messages. |
START | — | Press this button to begin cooking with the programmed recipe that is currently |
|
| displayed. After this button is pressed, the door will lock, the blower will start, and the |
|
| oven will start cooking. |
ADD TIME | — | Press this button after the cook cycle has completed if additional cooking is desired. An |
|
| additional 20 seconds of cooking is done using the power settings from the final step of |
|
| the last recipe used. |
PAUSE | — Press this button while the oven is cooking to pause the current cook cycle and unlock | |
|
| the door. Press the START button to resume cooking at the point the recipe was |
|
| interrupted. |
STOP | — Press this button while the oven is cooking or paused to stop the cook cycle. | |
1 Through 0 | — | Each of these buttons can have a recipe assigned to it. Press one of these buttons to |
|
| display that recipe. |
|
| In programming mode, these buttons are also used to enter numerical values. |
PGM | — Press this button to enter the programming mode and create or change a custom recipe. | |
NEXT | — Press this button while programming to go to the next recipe setting display screen. | |
PREV | — | Press this button while programming to return to the previous recipe setting display |
|
| screen. |
SAVE | — | Press this button while programming to save any changes to the program, exit |
|
| programming mode and return to normal oven operation. After this button has been |
|
| pressed, a message is displayed asking if you want to save the new recipe. You will be |
|
| prompted to press 1 if Yes, 2 if No. |
PWR LEVEL | — This button can be pressed while programming to step through and choose from the ten | |
|
| available power level settings. |
CLEAR | — Press this button to clear any recipe setting value while programming. | |
ON/OFF | — | Press this button to turn on the oven control system. Press it again to turn the oven off. |
PROGRAMMING THE HFB12 FLASHBAKE OVEN
The main buttons used for programming recipes are found on the bottom of the control panel. These buttons are outlined with a white box which is designated with a label PROGRAM. Each button is described above and will be discussed in this section as needed.
To Create or Edit a Recipe
To begin programming a recipe, press the PGM button. The oven then displays a prompt to select a recipe number to be programmed. Press one of the 10 recipe buttons to select a recipe number.
Select A Number To
Store Your Recipe
– 9 –