Hobart HFB12 ML-114906 manual To Save a Recipe or Exit Programming Mode, Recipe Options and Limits

Page 10

Next, a screen for selecting a cook method is displayed.

Select A Cook Method

1 = Standard

2 = Two-Step

There are two methods of cooking with the FlashBake oven. They are called STANDARD and TWO-STEP. See pages 11 and 13 for a description of each method.

Press the number corresponding to the cook method desired. The screens following will be specific to that cook method.

To Save a Recipe or Exit Programming Mode

At any time during the programming of a recipe, the SAVE button can be pressed to quit the programming operation. After the SAVE button is pressed, the display will ask if you want to save this new recipe:

Do You Want To Save

This New Recipe 1

1 = Yes

2 = No

If 1 is pressed, the display states that the recipe is stored in permanent memory. If 2 is pressed, changes made to the recipe are not stored, and the original unchanged settings remain.

RECIPE OPTIONS AND LIMITS

ENTRY

MINIMUM

MAXIMUM

 

 

 

Recipe

0

9

 

 

 

Cook Time min:sec

0:00

9:99

 

 

 

Full Power min:sec

0:00

9:99 less Cook Time

 

 

 

Top

0

10

 

 

 

Bottom

0

10

 

 

 

Top Center

0

10

 

 

 

Top Outer

0

10

 

 

 

Bottom Center

0

10

 

 

 

Bottom Outer

0

10

 

 

 

LAMP CENTER AND OUTER POWER LEVELS (Fig. 4)

The lamps are positioned so that the center lamps are above and below the center of the grill. The outer lamps are located above and below the rear of the grill. There is only one top center lamp and one bottom center lamp. The top outer has three lamps and the bottom outer has two lamps.

– 10 –

Image 10
Contents Tion Table of Contents Unpacking InstallationLocation Exhaust Duct Installation Installation Codes and StandardsAssembly United States of AmericaElectrical Connections For Hard-Wired OvensFor a Single-Phase 240 Volt Oven For Cord-Connected OvensElectrical Data START-UP TestingLamp Test Voltage Test Empty RecipeUtensils to USE PrecautionsOperation Approved Never UseProgramming the HFB12 Flashbake Oven To Create or Edit a RecipeLamp Center and Outer Power Levels Fig To Save a Recipe or Exit Programming ModeRecipe Options and Limits Creating a Standard Cook Method Recipe Lamp Power Cook TimeStandard Recipe Display Full Power TmeCreating a TWO-STEP Cook Method Recipe Zone Power TimeTwo-Step Recipe Display Operating the HFB12 OvenStarting a Recipe Stopping or Pausing a RecipeExtending the Cook Time Cook Cycle Counter High THROUGH-PUT Volume ConsistencyCooking Hints Cleaning Setting Food TypeBlower Approved Cleaning Materials and Procedures Cleaners Cleaning ToolsRemoving and Installing the TOP Lamp Shield Oven Door Lamp Shield RailInspecting the Oven MaintenanceLamp Replacement FusesTroubleshooting Problem Possible CausesHigh Power is not on Message Action