Xantech MRC44 installation instructions DRAG450MRC Basic System Window, Advanced

Model MRC44 Page: 27

Figure 17 – DRAG450MRC Basic System Window

(ADVANCED)

With Dragon open, from “FILE” select “NEW PROJECT” and give the project a name. Hit “ENTER” on the keyboard or click “SAVE”. Click on “USER SETTINGS” in the Menu bar. Select “ADVANCED DRAGON.” Click on the “BASE UNIT” Pull Down in the Menu bar and select “MRC44”.

The MRC44 “ADVANCED SYSTEM WINDOW” will appear with a "virtual keypad", default source buttons (SRC1, SRC2 etc.) buttons which allow selection of Zone (1-4), along with tabs, Sense Setup, Controller, Zone Linking and Icon Editor. In the menu bar, “User Settings” will indicate “(Advanced)”.

NOTE: A project can be changed from Advanced to Expanded and back with only a change in the number of Zones.

(EXPANDED)

With Dragon open, from “FILE” select “NEW PROJECT” and give the project a name. Hit “ENTER” on the keyboard or click “SAVE”. Click on “USER SETTINGS” in the Menu bar. Select “ADVANCED DRAGON.” Click on the “BASE UNIT” Pull Down in the Menu bar and select “MRC44”.

The MRC44 “ADVANCED SYSTEM WINDOW” will appear. Select the Controller tab. In the Expanded Options box, select ‘EXPANDED’. A message…”Please wait” will appear for about 10 seconds. A "virtual keypad", default source buttons (SRC1, SRC2 etc.) buttons which allow selection of Zone (1-8), along with tabs Sense Setup, Controller, Zone Linking and Icon Editor. In the menu bar, “User Settings” will indicate “(Advanced)”.

© 2002 Xantech Corporation