Frymaster J2X, J1X manual Canada

Page 2

NOTICE

This appliance is intended for professional use only and is to be operated by qualified personnel only. A Frymaster and DEAN Authorized Service Agent (ASA) or other qualified professional should perform installation, maintenance, and repairs. Installation, maintenance, or repairs by unqualified personnel may void the manufacturer’s warranty. See Chapter 1 of this manual for definitions of qualified personnel.

NOTICE

This equipment must be installed in accordance with the appropriate national and local codes of

the country and/or region in which the appliance is installed. See NATIONAL CODE

REQUIREMENTS in Chapter 2 of this manual for specifics.

NOTICE TO U.S. CUSTOMERS

This equipment is to be installed in compliance with the basic plumbing code of the Building Officials and Code Administrators International, Inc. (BOCA) and the Food Service Sanitation Manual of the U.S. Food and Drug Administration.

NOTICE

Drawings and photos used in this manual are intended to illustrate operational, cleaning and technical procedures and may not conform to onsite management operational procedures.

NOTICE TO OWNERS OF UNITS EQUIPPED WITH COMPUTERS

U.S.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. While this device is a verified Class A device, it has been shown to meet the Class B limits.

CANADA

This digital apparatus does not exceed the Class A or B limits for radio noise emissions as set out by the ICES-003 standard of the Canadian Department of Communications.

Cet appareil numerique n’emet pas de bruits radioelectriques depassany les limites de classe A et B prescrites dans la norme NMB-003 edictee par le Ministre des Communcations du Canada.

DANGER

Improper installation, adjustment, maintenance or service, and unauthorized alterations or modifications can cause property damage, injury, or death. Read the installation, operating, and service instructions thoroughly before installing or servicing this equipment. Only qualified service personnel may convert this appliance to use a gas other than that for which it was originally configured.

DANGER

No structural material on the fryer should be altered or removed to accommodate placement of the fryer under a hood. Questions? Call the Frymaster/Dean Service Hotline at 1-800-551-8633.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Jet NovemberCanada Retain and Store this Manual in a Safe Place for Future USE J1C, J1X, & J2X Master Jet Series Atmospheric Gas Fryers Frymaster domestic warranty Parts Ordering and Service Information Safety InformationJ1C, J1X, & J2X Master JET Series GAS Fryers Introduction Installation, Operating, and Service PersonnelEquipment Description What to do if your equipment arrives damaged Shipping Damage Claim ProcedureDefinitions General Installation Requirements Clearance and Ventilation Pre-Connection Preparations Leg InstallationDo not install this appliance without legs National Code RequirementsConnection to Gas Line J1C/J1X J2X Gas Connection Pipe SizesGas Pressure J2X Standard Burner ManifoldGas Pressure for J1C, J1X, and J2X Propane to Natural Converting to Another Gas TypeNatural to Propane Start-Up Procedure Accessing the PilotLighting the Pilot Lighting the PilotBoiling-Out the Frypot Shutting Down the Fryer Filtration Filtration Inspect Fryer and Accessories for Damage Fryer Preventive Maintenance Checks and ServicesDaily Checks and Services Filter Cooking OilClean Detachable Parts and Accessories Quarterly Checks and ServicesDrain and Clean Frypot Check Calibration of Thermostat Temperature Control KnobSEMI-ANNUAL Checks and Services Annual/Periodic System Inspection Introduction Troubleshooting Thermostat Controlled FryersProblem Probable Causes Corrective ActionTroubleshooting Abnormal Burner Operation Problem Probable Causes Corrective ActionFlame rolling out Pilot outage Service Procedures Cabinet Interior Description ReferenceCalibrating a Thermostat after Installation Replace Controlling or High-limit ThermostatAdjust Pilot Flame Replace the Pilot Generator CartridgeBurner Gas Pressure Adjustment Replacing the Fryer Gas ValveRemoving the Main Burner Assembly Replacing Burner DeflectorAlignment & Adjustment of Metal Burner Deflector Replacing the FrypotJ1C, J1X, & J2X Master JET Series GAS Fryers Service Parts Main ComponentsJ2X J1C, J1X, & J2X Master JET Series GAS Fryers Service PartsFrypot Components J1C & J1X Flue Assembly, J2X Burner Components J1C, J1X, & J2X Master JET Series GAS Fryers Gas ValveAccessories Basket Support RackThermostat Components This page Intentionally Left Blank Service Hotline

J1X, J2X specifications

Frymaster is a well-respected name in the commercial kitchen equipment industry, particularly known for its high-performance fryers. Among their innovative products are the Frymaster J1X and J2X, both designed to improve frying efficiency, consistency, and safety in busy kitchens.

The Frymaster J1X is a single tank, electric fryer, while the J2X is a more robust dual-tank model. Both fryers are engineered with advanced technologies to maximize productivity and product quality. One of the standout features is the digital control system, which allows users to set and monitor cooking temperatures with precision. This means that operators can achieve consistently perfect results for a variety of fried foods, leading to higher customer satisfaction.

The J1X and J2X also come equipped with an advanced oil filtration system. The built-in filtration not only extends the life of the frying oil but also ensures that food remains crisp and free from unwanted flavors. This self-filtering feature reduces labor costs and makes it easier for kitchen staff to maintain optimal frying conditions throughout the day.

Both models are designed with operator safety in mind. They include features such as a built-in high-limit shut-off switch, which prevents overheating, and a cool-to-the-touch exterior to minimize the risk of burns during cooking. The Frymaster fryers are also constructed from high-quality stainless steel, ensuring durability and easy cleaning.

In terms of energy efficiency, the J1X and J2X utilize innovative heating technology that not only heats the oil quickly but also maintains consistent temperatures, reducing energy consumption and overall operational costs. The fryers are also designed to accommodate a variety of food items, making them versatile for any kitchen setting.

Moreover, the Frymaster J2X has the added benefit of dual independently controlled fry tanks, allowing different types of food to be cooked simultaneously without flavor contamination. This is particularly beneficial in busy restaurants where diverse menus are served.

Both models are not only efficient and reliable but also user-friendly, designed to help kitchen staff work faster and smarter. Overall, the Frymaster J1X and J2X are powerful allies for any kitchen aiming to enhance its frying operations while ensuring food quality and safety. With their combination of innovative technology, safety features, and energy efficiency, these fryers represent an excellent investment for any foodservice establishment.
Top Page Image Contents