Frymaster J1X, J2X manual Frymaster domestic warranty

Page 5

frymaster domestic warranty

WHAT IS COVERED

This warranty covers all defects in workmanship and material in all commercial cooking appliances and computer/controller equipment manufactured by Frymaster and sold within the domestic United States, except as excluded below.

WHO IS COVERED

This warranty covers only the original purchaser of Frymaster commercial cooking appliances and computer/controller equipment. This warranty is not trans- ferable. You must have your original sales receipt for warranty coverage.

WHAT WE WILL DO

We will repair or replace the defective appliance, component, or part. Such repair or replacement will be at the expense of Frymaster, LLC; except that travel over 100 miles or two hours, overtime, and holiday charges will be at the expense of the purchaser.

FRYPOT WARRANTY

Stainless steel frypots on all fryers, except as noted below, are warranted against manufacturing defects and/or weld seam failure for the lifetime of the fryer; parts and labor, except after one year, the warranty is limited to replacement parts. Stainless frypots for models listed below are warranted for the length of time indicated.

5 Years

7 Years

10 Years

GF14, GF40

H55 (Effective

Pasta Systems

 

May 1, 1998)

(Gas and Electric)

 

Gas Protector

Rethermalizer

 

 

Water Bath Station

 

 

(Gas and Electric)

H55 and gas Protector® combustion chamber (infrared burners and structural components to mount the burners) warranted against defective material or workmanship for 7 years, parts and labor.

FENWAL THERMOSTATS

Warranted for two years, parts and labor, except after one year, the warranty is limited to replacement parts.

OTHER PARTS

All other parts components are warranted for one year from the date of purchase (parts and labor).

SHORTENING DISPOSAL UNIT

Warranted for 90 days parts and labor. In addition, the pump is warranted for one year, parts only.

REPLACEMENT PARTS AND DROP-IN FRYERS (J1X & J2X)

Parts, 90 days, no labor

Mild steel frypot, 90 days, no labor

Stainless Steel frypots, 1 year, 90 days labor

Computers, 1 year, no labor

HOW TO GET SERVICE

Contact our Authorized Service Agent to obtain warranty service. To find the name and location of the nearest ASA call your dealer, or call the Frymaster Service Hotline, 800-551-8633. You can also go to the Frymaster website, www.frymaster.com, click on Service, click on Locator, key in zip code and it will give you the ASA for that zip code. When calling for service, please furnish the model number, serial number, series code number, voltage of your appliance, and a description of the problem. You must keep your sales receipt for proof of your date of purchase.

WHAT THIS WARRANTY DOES NOT COVER

THE WARRANTIES PROVIDED BY FRYMASTER, LLC DO NOT APPLY IN THE FOLLOWING INSTANCES:

+Damage due to misuse, abuse, alteration, or accident.

+Improper or unauthorized repair.

+Failure to follow installation procedures, operation instructions and/or scheduled maintenance procedures as prescribed in your Frymaster Service and Owner’s Manual.

+Damage in shipment.

+Removal, alteration, or obliteration of the rating plate.

+Changes in adjustment and calibrations after thirty (30) days from equipment installation date.

+Failure to program computer appliances in accordance with programming procedures prescribed in your Frymaster Service and Owner’s Manual.

+Equipment exported to foreign countries.

+Normal maintenance items such as electric bulbs, fuses, gaskets, o-rings, interior and exterior finishes.

+Travel over 100 miles or two hours, overtime or holiday charges; all of which must be paid for by the purchaser.

+Consequential damages (the cost of repairing other property which is damaged), loss of time, profits, use or any other non-fryer related inciden- tal damages of any kind.

GENERAL EXCLUSIONS

No warranty is provided for any Frymaster fryer used in a mobile installation or concession. Warranty protection is only offered for fryers installed in accordance with the procedures described in the Frymaster Service and Owner’s Manual. Drop-in units, such as J1X and J2X, receive parts warranty only.

There are no implied warranties of merchantability of fitness for any particular use or purpose. This warranty is the only and complete statement with respect to warranties of your commercial cooking appliances and computer/controller equipment manufactured by Frymaster. There are no other documents or oral statements for which Frymaster will be responsible.

www.frymaster.com

Frymaster Domestic

Image 5
Contents November JetCanada Retain and Store this Manual in a Safe Place for Future USE J1C, J1X, & J2X Master Jet Series Atmospheric Gas Fryers Frymaster domestic warranty Safety Information Parts Ordering and Service InformationJ1C, J1X, & J2X Master JET Series GAS Fryers Introduction Installation, Operating, and Service PersonnelEquipment Description What to do if your equipment arrives damaged Shipping Damage Claim ProcedureDefinitions General Installation Requirements Clearance and Ventilation Do not install this appliance without legs Leg InstallationPre-Connection Preparations National Code RequirementsConnection to Gas Line J1C/J1X J2X Gas Connection Pipe SizesGas Pressure J2X Standard Burner ManifoldGas Pressure for J1C, J1X, and J2X Propane to Natural Converting to Another Gas TypeNatural to Propane Accessing the Pilot Start-Up ProcedureLighting the Pilot Lighting the PilotBoiling-Out the Frypot Shutting Down the Fryer Filtration Filtration Daily Checks and Services Fryer Preventive Maintenance Checks and ServicesInspect Fryer and Accessories for Damage Filter Cooking OilDrain and Clean Frypot Quarterly Checks and ServicesClean Detachable Parts and Accessories Check Calibration of Thermostat Temperature Control KnobSEMI-ANNUAL Checks and Services Annual/Periodic System Inspection Problem Troubleshooting Thermostat Controlled FryersIntroduction Probable Causes Corrective ActionProblem Probable Causes Corrective Action Troubleshooting Abnormal Burner OperationFlame rolling out Pilot outage Cabinet Interior Description Reference Service ProceduresReplace Controlling or High-limit Thermostat Calibrating a Thermostat after InstallationReplace the Pilot Generator Cartridge Adjust Pilot FlameReplacing the Fryer Gas Valve Burner Gas Pressure AdjustmentReplacing Burner Deflector Removing the Main Burner AssemblyReplacing the Frypot Alignment & Adjustment of Metal Burner DeflectorMain Components J1C, J1X, & J2X Master JET Series GAS Fryers Service PartsJ2X J1C, J1X, & J2X Master JET Series GAS Fryers Service PartsFrypot Components J1C & J1X Flue Assembly, J2X Burner Components Gas Valve J1C, J1X, & J2X Master JET Series GAS FryersBasket Support Rack AccessoriesThermostat Components This page Intentionally Left Blank Service Hotline

J1X, J2X specifications

Frymaster is a well-respected name in the commercial kitchen equipment industry, particularly known for its high-performance fryers. Among their innovative products are the Frymaster J1X and J2X, both designed to improve frying efficiency, consistency, and safety in busy kitchens.

The Frymaster J1X is a single tank, electric fryer, while the J2X is a more robust dual-tank model. Both fryers are engineered with advanced technologies to maximize productivity and product quality. One of the standout features is the digital control system, which allows users to set and monitor cooking temperatures with precision. This means that operators can achieve consistently perfect results for a variety of fried foods, leading to higher customer satisfaction.

The J1X and J2X also come equipped with an advanced oil filtration system. The built-in filtration not only extends the life of the frying oil but also ensures that food remains crisp and free from unwanted flavors. This self-filtering feature reduces labor costs and makes it easier for kitchen staff to maintain optimal frying conditions throughout the day.

Both models are designed with operator safety in mind. They include features such as a built-in high-limit shut-off switch, which prevents overheating, and a cool-to-the-touch exterior to minimize the risk of burns during cooking. The Frymaster fryers are also constructed from high-quality stainless steel, ensuring durability and easy cleaning.

In terms of energy efficiency, the J1X and J2X utilize innovative heating technology that not only heats the oil quickly but also maintains consistent temperatures, reducing energy consumption and overall operational costs. The fryers are also designed to accommodate a variety of food items, making them versatile for any kitchen setting.

Moreover, the Frymaster J2X has the added benefit of dual independently controlled fry tanks, allowing different types of food to be cooked simultaneously without flavor contamination. This is particularly beneficial in busy restaurants where diverse menus are served.

Both models are not only efficient and reliable but also user-friendly, designed to help kitchen staff work faster and smarter. Overall, the Frymaster J1X and J2X are powerful allies for any kitchen aiming to enhance its frying operations while ensuring food quality and safety. With their combination of innovative technology, safety features, and energy efficiency, these fryers represent an excellent investment for any foodservice establishment.