SERVER
[Server]- Section name.
PortType - Communication medium (AUTO,
NumberDevices - Number of devices to be polled by the server. OfflinePollTime - How often to poll for offline devices. Milliseconds Tries - No. of tries during polling before a device is marked offline. HostAdapterCheck - Enables/disables the detection of receiver. (0 or 1) BaudRate
19200. Use this parameter for receivers that use a different baud rate than the default. Make sure the value in the ini file matches the value set in the hardware.
DefaultTempUnits - specifies the starting units of Temperature devices DefaultPressUnits - specifies the starting units of Pressure devices ConfigureEnable – 0 – disables the Setup Menu option on the main menu.
The user then cannot make any changes to the configuration. 1 – (default) – enable the Setup Menu option on the main menu.
SmallINI – suppresses the listing of minor variables in order to make the ini file smaller (useful for large networks since under Windows, an ini file may be a maximum of 64K).
DefaultThermistorCorrID – overrides the default thermistor Correction ID (normally 128). All thermistors will be assigned this Correction ID unless the ID is overriOPCn in the individual device section.
ForwardAll – species if all packets are forwarded or only packets associated with
16 N |