Frymaster BK1814E operation manual Filtering Tools

4.4.2 Filtering Tools

Assemble tools to be used for filtering. These are supplied with the filter starter kit included with the fryer/filter system:

•Frypot/Filter Brush - used to clean frypot and filter pan sides and bottom, heating elements, and to dislodge sediment during filtration or oil change.

•Clean-out Rod (design may vary) - used to dislodge heavy debris in the drain tube (when needed).

•Filter Powder.

•Filter Paper.

The following tools are not required, but are recommended to make the filtering task easier.

•Measuring Cup - used to measure filter powder.

•Stainless Steel Crumb Scoop - for removing large debris from oil prior to filtering.

CAUTION

Always wear oil-resistant, insulated gloves and/or protective gear when working with hot oil.

4-7