Jenn-Air SEG196 manual How a Surface Burner Works, How to Operate in the Event of a Power Failure

Page 9

How a Surface

Burner Works

When the surface burner valve is turned on, gas enters the mixer tube and mixes with air. This air and gas mixture flows to the burner head and is lighted by a spark from the solid state igniter.

A properly adjusted burner with clean ports will light within a few seconds. The cone-shaped flame will be clear blue in color with a clearly defined inner cone. There should be no trace of yellow in the flame. A yellow flame indicates an improper mixture of air and gas. This wastes fuel so have a serviceman adjust the air and gas mixture by adjusting the air shutter if a yellow flame ever occurs.

The variable surface controls for the surface burners and grill burner provide flexibility in heat setting selection.

How to Operate in the Event of a Power Failure

Surface Hurners

In case of prolonged power failure, you can manually light the surface burner by holding a lighted match near the burner ports and slowly turning the control knob

counterclockwise (after depressing) until the gas ignites. There is no fan so smoke and condensation can gather.

IN CASE OF POWER FAILURE, DO NOT USE GRILL. VENTILATION SYSTEM WILL NOT OPERATE.

IF THE VENTILATION SYSTEM IS INOPERABLE FOR ANY REASON, DO NOT OPERATE GRILL.

Image 9

Contents Gas-Electric Grill-Range MmmWhat to do if YOU Smell GAS AboutJenn-AirYour Appliance Usage Safety Page Remove Broiler PAN, FOOD, and Other Utensils Important Safety Notice and Warning How a Surface Burner Works How to Operate in the Event of a Power FailureAir Shutter Adjustment Lo Flame AdjustmentGrill Burner Flamesze To adjust tlc lAD settlingCoo lnp Grill Controls CooktopGrill OperationandUsing the Ventilation System Cleaning the Ventilation SystemVentilation System To Set Controls Surface ControlsSize of Cookware Cookware SelectionCookware Materials Covered CookwareModuleSurface Burner To hnstall IBurner ModuleTo Rcn.ove Burner Module To Remove Grill Module To Install Grill ModuleShould sustained flare-up occur Using the GrillGrill Guide Grilling Tips Cleaning the Grill OfCleaningYour RangeOther Parts Stainless Steel Areas OvenOperation Ventilation System and Oven Light SwitchRack Positions Oven Operation Baking or RoastingTo set thne of day on clock Clock ControlsTo set Minute Timer Minute TimerTo set oven to start immediately and shut off automatically Clock-Controlled Baking or RoastingTo change Stop Time General Baking Recommendations Causes Cake Convection Baking RecommendationsCake Baking ChartConvection Baking Frozen Convenience Foods Here Are Few Examples Times TemperaturesConvection Cooking on Multiple Racks Radiant Bake Roasting Recommendations RoastingConvection Roasting Recommendations Beef Convection Roasting Thawed Meats OnlyBroiling To BroilBroiling Tips Broiling ,CHART How to Prepare Oven Before Operating Self-Cleamng Process Oven CleaningAuto Clean Feature To set oven to start cleaning at a later time To set oven to start cleaning immediatelyTo change Stop Time before cleaning begins To change Start Time before cleaning beginsTo stop cleaning process after lock indicator light comes on More Information on Self-Cleanlng Process Oth er Hints o n Caring for Your Range How To Remove Range For Cleaning Or ServicingOven Thermostat Knob Adjustment To adjust the thermostat knobOven Racks To replace light builT Oven Light BulbSurface Burner Module Model AG200 Wok --Model AG340BeforeServiceYou Call If oven ,lid not clean properly If riven will not go through self-cleanlng processIf oven door will not unlock If foods tiT. nod broU lroperly