Jenn-Air W10300219A Installation Instructions, Unpack Dish Drawer, Prepare Cabinet Opening

INSTALLATION INSTRUCTIONS

WARNING

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

1.Disconnect power.

2.Turn off water supply.

Unpack Dish Drawer

WARNING

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1.Read valuable information on exterior of shipping box before opening.

2.Remove shipping materials, tape and film from the dishwasher. Remove parts package from inside the dishwasher.

Prepare Cabinet Opening

1.To ensure minimum clearance dimensions exist:

■Measure the distance from the cabinet countertop to the floor and ensure 33³⁄₄" (85.7 cm) minimum height.

■Measure the distance from the front of the cabinet to the back wall and ensure 24" (61 cm) minimum depth.

■Measure the distance from the left-hand side to the right- hand side of opening and ensure 23½" (59.7 cm) minimum width.

2.Drill 1½" (3.8 cm) diameter holes for drain and water hoses and electrical wiring as shown. Holes should be placed ½" (1.3 cm) from back wall.

A

¹⁄₂"

(1.3 cm)

25"

(63.5 cm)

B

8"

(20.3 cm)

A. Choose left-hand or right-hand drain and water hose route. B. Choose left-hand or right-hand electric wire route.

Wood cabinet: Sand the hole until smooth.

Metal cabinet: Cover hole with grommet (Part Number 302797 provided).

3.Install mounting brackets 17" (43.2 cm) from floor using screws provided. If needed, drill ¹⁄₈" pilot holes in cabinet.

17"

(43.2 cm)

4.Decide which dishwasher-to-counter attachment method will be used.

7