Bloomfield WFAE-55FS Cradle Lift Lubrication, Cradle Roller Assemblies, Immediately

Page 32

MAINTENANCE INSTRUCTIONS - CRADLE LIFT

WARNING WARNING: PINCH HAZARD

DISCONNECT FRYER FROM ELECTRIC POWER BEFORE

LUBRICATING CRADLE LIFT DRIVE SCREW

If power is not disconnected, lift motor may start unexpectedly,

causing serious injury

NOTE:

Failure to keep the cradle lift screw properly lubricated will result in premature wear

of the brass lift nut Wear caused by lack of proper lubrication is NOT covered by warranty.

Recommended frequency is “as required”, and, at a minimum, every six months. Lubricate cradle lift screw immediately if a grinding or rubbing noise is heard when basket is raising.

NOTE:

Smooth operation of the rollers is essential to the life of the frypot. If rollers do not turn freely during operation, they will soon wear grooves through the frypot wall.

IMPORTANT:

IF ROLLERS ARE FROZEN OR OTHERWISE FOUND TO NOT SPIN FREELY AFTER BEING THOROUGHLY CLEANED, REPLACE THEM

CRADLE LIFT LUBRICATION

Disconnect the fryer from electrical power.

Open rear access panel. Coat exposed threads of cradle lift screw with moly (molybdenum disulfide) grease.

Close access panel and restore electrical power.

CRADLE LIFT

DRIVE SCREW

GREASE

THREADS

ACCESS PANEL

BRASS

NUT

CRADLE LIFT

DRIVE MOTOR

CRADLE ROLLER ASSEMBLIES

DAILY: Wash cradle in a dishwasher or in a sink with warm water and mild soap or detergent.

IMMEDIATELY.

Wear to the FRYPOT caused by frozen rollers is not covered by warranty.

Thoroughly flush roller bearings with hot water (under a faucet or with a spray nozzle).

Rinse cradle thoroughly and dry completely.

Check rollers to be sure they roll freely.

Check the bearing nuts.

KEEP THEM TIGHT!

ROLLER

RETAINING NUT

363 300007 OpManual for WFAE-50F/FS Electric Fryer

30

Image 32
Contents WFAE-55F 363 300007 OpManual for WFAE-50F/FS Electric Fryer Dimensions Electrical Specifications Domestic Export EU VoltagePower CapacitiesPower Switch TimerBuzzer Switch Filter Pump SwitchTemperature Control Power Outlet BOXReset Button Heater Interlock SwitchTime KEY Temp KEYDigital Readout UP Arrow KEYSonalert For Units with Solid Shortening Melt OptionContact Block Heater363 300007 OpManual for WFAE-50F/FS Electric Fryer STD E6070363 300007 OpManual for WFAE-50F/FS Electric Fryer Field Wiring WVAE-55FPRE-CLEANING Procedure Burn HazardWVAE-55FSPRE-CLEANING Procedure Burn HazardLift Cradle ReservoirFor Fryers with Vent Hood WVAE-55… Solid Shortening Melt OPTION. do not USE LardDetermine Maximum Load Weight SET Cook Timer and Load Product PRE-HEATING FryerBurn Hazard Cook Cycle and BuzzerProgramming KEY Functions Program Menu Times and Temperatures Using Function Keys Operation WFAE-55FSPRE-HEAT the Fryer To Cook ProductDrain Heater Safety Switch Cleaning Instructions Electric Shock HazardCleaning Instructions Tools PreparationFrequency Filter Leaf Assembly Bottom ScreenFiltering OIL 363 30007 OpManual for WFAE-55F/FS Electric Fryer Remember HOT OIL will Burn YOUOIL Disposal Container 4 NPT Street Elbow Cradle Lift Lubrication Cradle Roller AssembliesImmediately Keep Them TightTroubleshooting WFAE-55F Manual Controls Symptom Possible Cause Suggested RemedyTroubleshooting WFAE-55FS Solid State Controls 363 30007 OpManual for WFAE-55F/FS Electric Fryer Wells

WFAE-55FS, WFAE-55F specifications

The Bloomfield WFAE-55F and WFAE-55FS are two highly regarded commercial coffee brewers that have gained popularity in cafés, restaurants, and convenience stores. Designed with the professional barista in mind, both models embody efficiency, durability, and stellar brewing technology, ensuring that each cup is crafted to perfection.

One of the key features of the WFAE-55F and WFAE-55FS is their ability to brew large quantities of coffee effortlessly. Both models are equipped with a dual-function brewer that allows for simultaneous brewing and dispensing, making it ideal for high-traffic environments. With a capacity of up to 55 cups at a time, operators can meet the demands of busy service periods without compromising on taste or quality.

Both models are constructed with stainless steel, ensuring not only durability but also a contemporary aesthetic that fits seamlessly into any modern kitchen. The materials used in the construction allow for easy cleaning and maintenance, keeping hygiene standards high. Additionally, the brewers are designed to withstand the rigors of daily use, making them a sound investment for any serious coffee business.

The WFAE-55F and WFAE-55FS also feature advanced brewing technology that supports precision brewing. The temperature control system guarantees the water is heated to the optimal range for extraction, ensuring that the rich flavors and aromas of the coffee beans are fully realized. The controlled flow rate enhances the brewing process, allowing for even saturation of coffee grounds, which further improves the consistency of each brew.

Another significant characteristic of the WFAE-55F and WFAE-55FS is their user-friendly interface. The intuitive controls allow baristas to adjust brewing times and temperatures easily, adapting to different types of coffee and individual preferences. This versatility proves beneficial for establishments that offer a wide range of coffee options.

Both models support the use of paper filters, streamlining the brewing process while maintaining quality. Moreover, their compact design, coupled with robust functionality, makes them suitable for a variety of settings, from small cafés to large dining establishments.

In conclusion, the Bloomfield WFAE-55F and WFAE-55FS coffee brewers represent the ideal fusion of advanced brewing technology, durability, and user-centric design. Their capacity to produce large quantities of high-quality coffee makes them invaluable tools for any commercial coffee operation, providing both efficiency and remarkable flavor in every cup brewed.