Bloomfield 2216EX, 2274EX, 2212, 2272 Warranty Statement, Shipping Damage Claims Procedure

Page 2

WARRANTY STATEMENT

All electrical equipment manufactured by BLOOMFIELD INDUSTRIES is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

BLOOMFIELD INDUSTRIES DIVISION / SPECIALTY EQUIPMENT MANUFACTURING CORPORATION SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Industries Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transportation charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Bloomfield Industries

P.O. Box 280

Verdi, NV 89439

Phone: (775) 345-0444

Fax: (775) 345-0569

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

SHIPPING DAMAGE CLAIMS PROCEDURE

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Bloomfield Industries cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

xi

Image 2
Contents Decanter Brewer Warranty Statement Shipping Damage Claims ProcedureDimensions Table of ContentsFeatures & Operating Controls Precautions and General Information Electrical DamageLeveling the Unit Installation InstructionsPLUMBER’S Installation Instructions ELECTRICIAN’S Installation Instructions Agency Approval InformationOperating Instructions OperationUSER’S Guide Frequency Cleaning InstructionsPrecautions ToolsServicing Operational Adjustments TimerSee page 11 for Component Names / Numbers Servicing Instructions ElectricalOperation Thermistor PROBE, TemperatureASSEMBLY, Triac & Heat Sink THERMOSTAT, HI-LIMITServicing Instructions Plumbing See page 13 for Component NAMES/NUMBERSDescription Part N0 Used on Servicing Instructions DE-LIMING Heater Tank Burn HazardLOW Water Level Servicing Instructions Diagnostics & TroubleshootingTemperature has Recovered OverheatExploded View IN-LINE Models Parts List IN-LINE Models Exploded View STEP-UP Models Parts List STEP-UP Models Wiring Diagram IN-LINE Models Wiring Diagram IN-LINE Export Model Wiring Diagram STEP-UP Model Control BoardWiring Diagram STEP-UP Export Model Bloomfield Industries, Inc Division of Carrier Refrigeration

2272, 2212, 2216, 2274EX, 2216EX specifications

The Bloomfield series of coffee brewers and tea urns, specifically the models 2274EX, 2272, 2216, 2212, and 2216EX, is engineered for exceptional performance and reliability. Each model showcases unique features tailored to meet the demands of cafés, restaurants, and catering services, making them popular choices in the foodservice industry.

Starting with the Bloomfield 2274EX, this model is a dual brewer capable of producing coffee and tea simultaneously. It boasts an energy-saving mode and features precision brewing technology that ensures optimal extraction for a rich flavor profile. The 2274EX also includes a programmable timer and an intuitive control panel, allowing for easy operation and personalization.

The Bloomfield 2272, on the other hand, is designed with versatility in mind. It features a compact design ideal for establishments with limited space. The 2272 comes equipped with Bloomfield’s advanced water heating technology, ensuring quick heating times and maintaining consistent water temperatures for brewing. The user-friendly interface allows baristas to select different brew strengths, accommodating customer preferences efficiently.

The 2216 and 2212 models are single-brew systems well-suited for locations aiming to provide high-quality beverages in smaller volumes. The 2216 features a hot water faucet for tea or instant beverage preparation, while the 2212 focuses solely on brewed coffee. Both models are built with durable materials that withstand the rigors of daily use, while their programmable features allow for adjusting brew times and temperatures to create the perfect cup of coffee.

Lastly, the 2216EX offers enhanced capabilities compared to its counterparts. With additional features such as dual coffee brewing heads and a built-in digital brew timer, this model provides both efficiency and convenience in busy environments. The stainless-steel construction ensures longevity, while the precision brewing technology captures the essence of each coffee bean.

In summary, the Bloomfield 2274EX, 2272, 2216, 2212, and 2216EX each represent a blend of innovative design and advanced brewing technologies. These models are tailored to meet a range of operational needs, ensuring that businesses can provide high-quality beverages while maximizing efficiency and user-friendliness. Whether for high-volume operations or smaller setups, there is a Bloomfield model tailored to enhance any beverage service experience.