Operating Instructions
Countdown
The countdown operates independently and can therefore be set when the oven is switched on as well as switched off.
Setting the Countdown
01. Press the “CLOCK” C button.
2. Set the time required within
5 seconds using the + and - buttons.
When the time set on the count- down has expired, an acoustic signal sounds for approx. two minutes.
3.Press the “CLOCK” C button to switch off the signal.
Changing the Setting on the Countdown
01. Using the “CLOCK” C button,
2. Set the new time required within 5 seconds using the + or - buttons.
Switching Off the Countdown Early
01. Using the “CLOCK” C button,
2.Within 5 seconds set the time required to "0" using the - button.
Checking the Countdown Setting
A few seconds after the countdown has been set, the time display indi- cates the current time again. You can check the amount of time left on the countdown at any time.
01. Using the “CLOCK” C button,
Changing the Signal Tone
The frequency of the signal tone can be set to 3 different tones.
0 1. Press the - button until the changed signal tone sounds and release. The frequency is set to the next level.
2.Press the - button again until the changed signal tone sounds and release.
The frequency is set to the next level.
22