Cecilware GB-IT operation manual Service Mode, General Conventions

Page 11

13.Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding Hopper to blink and the LCD/VFD screen will display the Gram Throw for the indicated Hopper as follows:

14.Pressing ▼or ▲ key will decrease or increase the Gram Throw respectively.

15.If the Stop key is pressed the LCD/VFD screen will display the following:

GRAM THROW

###

HOPPER STATUS

SELECT A KEY

16. Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding

HOPPER

HOPPER STATUS

Hopper to blink and the LCD/VFD screen will display the Status for the indicated Hopper as

STATUS ON

OFF

follows:

 

 

 

 

 

17.If the ▼or ▲ keys are pressed the Hopper Status will toggle between “on” and “off”.

Note: IF either the Auger Motor, or Mixer Motor, or Solenoid Error Screen appear: The entire system is inoperable this means that one of either the Auger Motor, or Mixer Motor, or Solenoid [Dispense Valve] is not functional while that Hopper Status in ON.

To continue operating the other Hoppers: Press RINSE, Press ▼or ▲ key until you get the HOPPER STATUS screen, Set the non-functional HOPPER STATUS to OFF, Wait at least 10 sec., then Exit program.

SERVICE MODE

General Conventions:

1.To enter or exit Service Mode simultaneously depress both the hidden key behind the Cecilware Logo and the hidden key behind the Fast Flow Logo until the buzzer sounds (approximately 1.5 seconds).

2.Pressing the Stop key will cause the menu to scroll up and pressing the Rinse key will cause the menu to scroll down.

3.The blinking LED(s) signify which Hopper or Serving Size the displayed parameter corresponds to.

4.Pressing the ▼and ▲keys individually will decrease or increase the displayed parameter respectively.

5.Pressing the ▼and ▲keys simultaneously will cause the parameter to revert to a default value.

Functions:

1.All Dispense LED’s will be illuminated and the LCD/VFD screen will display the following:

DISPENSE TOTAL

SELECT A KEY

2.

Pressing any of the Dispense keys will cause the Dispense LED of the corresponding key to

 

DISPENSE TOTAL

 

blink and the LCD/VFD screen will display the serving counter for the indicated Dispense

 

#######.# OZ.

 

key as follows:

 

 

3.

Pressing the ▼and ▲ keys simultaneously will reset the Dispense Total for the indicated

Hopper.

 

4.If the Stop key is pressed the LCD/VFD screen will display one of the following:

5.Pressing any of the Dispense keys will cause the Dispense LED of the

.

corresponding key to blink and the LCD/VFD screen will display the Serving

 

Counter for the indicated Dispense key as follows:

SERVING COUNTER

SELECT A KEY

 

SERVING COUNTER

SERVING COUNTER

 

SELECT A KEY

##### CUPS

 

 

 

 

 

 

6. Pressing the ▼and ▲ keys simultaneously will reset the Serving Counter for the indicated Dispense key.

7.If the Stop key is pressed the LCD/VFD screen will display the following:

DISPENSE MODE

FREE FLOW

DISPENSE MODE

PORTION CONTROL

9.If the Stop key is pressed the LCD/VFD screen will display the following:

10.Pressing any of the Dispense keys will cause the Dispense LED of the corresponding key to blink and the LCD/VFD screen will display the Serving Size for the indicated Dispense key as follows:

SERVING SIZE SELECT A KEY

SERVING SIZE

##.## OZ.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents GB-IT Intelligent Technology Unpacking Instructions Mechanical SpecificationsElectrical Specifications Installation InstructionsFor Soup START-UP ProcedureFor Cappuccino For CoffeeWater Level Controls GB3M-5.5-IT Dimensions & Conponents Location ILL. aAdjustments ILL. B Features and Benefits of the Digital Dispenser Controller Parameter Definitions for System Software Version OFF Programming Instructions ILL. C Initializing ModeNormal Mode Rinse ModePortion control Program ModeTeach Me Timer Setup FunctionsGeneral Conventions Service ModeGram Throw Select a KEY Rinse Lockout Definition of Screens During Normal Operation Definition of Error Screens and Troubleshooting Communications Failure Screen Over Temperature / Over Flow Error ScreenCommunications Error Screen TestsCheck ALL Chamber Mounts for Signs of Wear Recommended Preventive MaintenanceClean OUT Vent MOTOR, Trough and Tubing Check ALL Dispense Valves for Lime BUILD-UPTo replace the Fluorescent Bulb Cleaning SANITIZING, Cleaning and Refilling HoppersHopper and Dispensing Chamber Assys with Wire Augers ILL. E Hopper and Dispensing Chamber Assy with Nylon Augers ILL. E Set Temperature at 195F See Programming Instructions Problem Probable Cause RemedyTank ASS’Y ILL. F Description QTY Door ASS’Y with Components GB3M5.5 IT Shown ILL. GDescription GB3M-10-ITPage Description GBM-5.5-IT Common Parts Identification ListPage Page Page Page Page Page Using Older Version of Touch PAD with ONE Ribbon Connector Using Older Version of Touch PAD with ONE Ribbon Connector

GB-IT specifications

The Cecilware GB-IT is a cutting-edge coffee brewing system designed to cater to the needs of cafes, restaurants, and other commercial establishments that require efficiency, speed, and quality in coffee production. This machine stands out for its robust construction and the use of advanced technologies, making it a reliable choice for high-demand environments.

One of the primary features of the Cecilware GB-IT is its dual-purpose capability, functioning as both an automatic brewer and a tea brewer. This versatility allows businesses to serve a wide range of hot beverages without needing multiple machines, ultimately saving space and reducing operational costs. The GB-IT has a generous brewing capacity, typically handling up to 3 gallons of coffee in a single batch, which is essential for busy service periods.

The machine is equipped with a unique digital brew control that allows users to set precise brew times and temperatures. This feature ensures that each cup of coffee is brewed to perfection, providing a consistent flavor profile that loyal customers can rely on. Additionally, the GB-IT comes with programmable volumes, allowing operators to customize the amount of coffee brewed based on their specific needs and customer demand.

Another notable characteristic of the Cecilware GB-IT is its durable construction. Built with high-quality stainless steel, the machine not only has an appealing aesthetic but is also designed to withstand the rigors of daily use in a bustling commercial environment. Its compact footprint allows it to fit seamlessly into any kitchen setup, maximizing counter space while still delivering high performance.

The GB-IT also incorporates advanced safety features, including an automatic shut-off system that activates when the water reservoir runs low or the brewing cycle is complete. This thoughtful design minimizes the risk of overheating and ensures the longevity of the machine.

In terms of maintenance, the Cecilware GB-IT is designed for easy cleaning and servicing, with components that can be easily accessed. This ensures that operators can perform routine maintenance without significant downtime, contributing to overall operational efficiency.

In summary, the Cecilware GB-IT stands as an excellent solution for businesses that prioritize quality, efficiency, and versatility in their beverage offerings. With its advanced features, durable construction, and user-friendly design, it is a worthwhile investment for any establishment looking to elevate their coffee and tea service.
Top Page Image Contents