Cecilware GB-IT operation manual Gram Throw Select a KEY

Page 12

11.If the Stop key is pressed the LCD/VFD screen will display the following:

12.Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding Hopper to blink and the LCD/VFD screen will display the Gram Throw for the indicated Hopper as follows:

13.If the Stop key is pressed the LCD/VFD screen will display the following:

14.Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding Hopper to blink and the LCD/VFD screen will display the Auger Start Time for the indicated Hopper as follows:

15.If the Stop key is pressed the LCD/VFD screen will display the following:

16.Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding Hopper to blink and the LCD/VFD screen will display the Mixer Start Time for the indicated Hopper as follows:

17.Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding Hopper to blink and the LCD/VFD screen will display the Auger Stop Time for the indicated Hopper as follows:

18.If the Stop key is pressed the LCD/VFD screen will display the following:

19.If the Stop key is pressed the LCD/VFD screen will display the following:

20.Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding Hopper to blink and the LCD/VFD screen will display the Mixer Stop Time for the indicated Hopper as follows:

21 If the Stop key is pressed the LCD/VFD screen will display the following:

22.If the Stop key is pressed the LCD/VFD screen will display one of the following:

GRAM THROW

SELECT A KEY

GRAM THROW

###

AUGER START TIME

SELECT A KEY

AUGER START TIME

#.# SEC.

MIXER START TIME

SELECT A KEY

MIXER START TIME

#.# SEC.

AUGER STOP TIME

SELECT A KEY

AUGER STOP TIME

#.# SEC.

MIXER STOP TIME

SELECT A KEY

MIXER STOP TIME

#.# SEC.

FILL CONSTANT

#.## OZ./SEC.

RINSE TIME

## SEC.

23.If the Stop key is pressed the LCD/VFD screen will display one of the following:

24.If the ▼and ▲ keys are pressed the Rinse Lockout will toggle between “on” and “off”.

25.If the Stop key is pressed the LCD/VFD screen will display one of the following:

26.If the ▼and ▲ keys are pressed the Rinse Warning will toggle between “on” and “off”.

 

RINSE WARNING

RINSE WARNING

 

 

ON

OFF

 

 

 

 

 

 

 

 

 

 

 

RINSE LOCKOUT

RINSE LOCKOUT

 

 

ON

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents GB-IT Intelligent Technology Mechanical Specifications Electrical SpecificationsInstallation Instructions Unpacking InstructionsSTART-UP Procedure For CappuccinoFor Coffee For SoupGB3M-5.5-IT Dimensions & Conponents Location ILL. a Water Level ControlsAdjustments ILL. B Features and Benefits of the Digital Dispenser Controller Parameter Definitions for System Software Version OFF Initializing Mode Normal Mode Rinse Mode Programming Instructions ILL. CProgram Mode Teach Me Timer SetupFunctions Portion controlService Mode General ConventionsGram Throw Select a KEY Rinse Lockout Definition of Screens During Normal Operation Definition of Error Screens and Troubleshooting Over Temperature / Over Flow Error Screen Communications Error ScreenTests Communications Failure ScreenRecommended Preventive Maintenance Clean OUT Vent MOTOR, Trough and TubingCheck ALL Dispense Valves for Lime BUILD-UP Check ALL Chamber Mounts for Signs of WearTo replace the Fluorescent Bulb SANITIZING, Cleaning and Refilling Hoppers CleaningHopper and Dispensing Chamber Assys with Wire Augers ILL. E Hopper and Dispensing Chamber Assy with Nylon Augers ILL. E Problem Probable Cause Remedy Set Temperature at 195F See Programming InstructionsTank ASS’Y ILL. F Door ASS’Y with Components GB3M5.5 IT Shown ILL. G DescriptionGB3M-10-IT Description QTYPage GBM-5.5-IT Common Parts Identification List DescriptionPage Page Page Page Page Page Using Older Version of Touch PAD with ONE Ribbon Connector Using Older Version of Touch PAD with ONE Ribbon Connector
Top Page Image Contents