AEG 41056VH-MN user manual Electrical connection, Use

Page 5

Safety information

 

5

 

 

Electrical connection

Only an approved electrician can install and connect the appliance. Contact an approved service centre. This is to prevent the risks of structural damage or physical injury.

The appliance must be earthed.

Make sure that the electrical data on the rating plate agree with your domestic power supply.

Information on the voltage is on the rating plate.

You must have the correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.

The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

The shock protection parts must be fixed in such a way that they cannot be undone without tools.

Always use a correctly installed shockproof socket.

When you connect electrical appliances to mains sockets, do not let cables touch or come near the hot appliance door.

Do not use multi-way plugs, connectors and extension cables. There is a risk of fire.

Make sure not to squash or cause damage to the mains plug (if applicable) and cable behind the appliance.

Make sure that the mains connection is accessible after the installation.

Do not pull the mains cable to disconnect the appliance. Always pull the mains plug (if applicable).

Do not replace or change the mains cable. Contact the service centre.

Use

Only use the appliance for domestic cooking tasks. Do not use the appliance for commer- cial and industrial use. This is to prevent physical injury to persons or prevent damage to property.

Always monitor the appliance during operation.

Always stay away from the appliance when you open the door while the appliance is in operation. Hot steam can release. There is a risk of burns.

Do not use this appliance if it is in contact with water. Do not operate the appliance with wet hands.

Do not use the appliance as a work surface or storage surface.

The cooking surface of the appliance becomes hot during use. There is a risk of burns. Do not put metallic objects, for example cutlery or saucepans lids, on the surface, as they can become hot.

The interior of the appliance becomes hot during use. There is a risk of burns. Use gloves when you insert or remove the accessories or pots.

The appliance and its accessible parts become hot during use. Take care to avoid touch- ing the heating elements. Young children must be kept away unless continuously super- vised.

Image 5
Contents EN Cooker For Perfect Results Accessories and ConsumablesContents Children and vulnerable people safety Safety InformationGeneral safety InstallationUse Electrical connectionCare and cleaning Disposal of the appliance Service centreGeneral overview Product DescriptionInitial Cleaning AccessoriesSetting the time Before First USEResidual heat indicator Heat settingsHOB Daily USE Use of the double zoneHOB Helpful Hints and Tips Heat Use to Time Hints SettingCookware Energy savingSwitching the Oven On and Off HOB Care and CleaningOven Daily USE Cooling fanOven function Application Oven FunctionsTelescopic shelf supports Clock function Application Oven Clock FunctionsDisplay Cancelling the clock functions Setting the clock functionsOven Helpful Hints and Tips BakingStreaky Cake sinks be Baking resultsTime hmin Type of bakingLevels Type of baking Oven LevelFan baking table Type of baking Shelf level Temperature C Time MinsDish Time Hr MinReady meals Temperature C TimeRoasting Type of meatMeat loaf Defrosting GrillingFood to grill Shelf level Time Further defrosting CommentsFood to be dried DryingPreserving Preserve Oven Care and CleaningInformation on acrylamides Oven Ceiling Shelf Support RailsOven door and glass panels Oven lamp Removing the drawer Problem Possible cause RemedyWhat to do IF… Technical Data InstallationElectrical installation DimensionsPackaging material Environment ConcernsPage 892941227-C-082011