Time-setting options
You0can call up the
If the oven is switched off:
■Setting the timer
■Setting the clock
If the oven is switched on:
■Setting the cooking time
■Setting a later end time
■Setting the timer
Setting the time-setting options in brief
1. Press the 0 button to open the menu.
2. Use the X or Y button to switch to another line and set the time or cooking time with the rotary selector.
3. Press the 0 button to close the menu.
A detailed description of how to adjust each individual function is provided below.
Setting the cooking time
If you set the cooking time for your dish, operation stops automatically once this time has elapsed. The oven stops heating.
Prerequisite: The type of heating and temperature must be set.
Note: You can only set hours and minutes.
Example in the picture: top/bottom heating setting, 180 °C, cooking time of 45 minutes
1.Press the 0 button.
The
% |
) |
|
2.Turn the rotary selector to set the cooking time.
% |
) |
|
3.Press the 0 button.
The
4.If the operation has not yet started, press the n button. You can see the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows the cooking time0as 00:00:00. You can cancel the signal early by pressing the button.
Cancelling the cooking time
Press the 0 button to open the menu. Set the cooking0 time
to 00:00:00 using the rotary selector. Press the button to close the menu.
Changing the cooking time
Press the 0 button to open the menu. Change0 the cooking
time using the rotary selector. Press the button to close the menu.
Setting a later end time
Please remember that easily spoiled foods must not be allowed to remain in the cooking compartment for too long.
A later end time can be set for
■all types of heating and all dishes from the recommended settings
■a variety of programmes
■and for
Example: you put the dish in the cooking compartment at 9.30 . It takes 45 minutes to cook and will be ready at 10.15, but you would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for
Setting a later end time
Precondition: The selected operation has not already begun and a 0cooking time has been set. The
menu is open.
1.Switch to "End" using the X button. The end time of the operation is displayed in the second line.
% |
" |
|
2.Set a later end time by turning the rotary selector.
% |
* |
" |
|
3.Press the 0 button to close the
4.Confirm by pressing the n button. 0... standby. The endThe setting is adopted. The oven is in
time is displayed in the status bar. When cooking starts, the cooking time is shown counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows the cooking time0as 00:00:00. You can cancel the signal early by pressing the button.
This is possible while the oven is in standbyX . Press the 0
button to open the menu. Press the button0and correct the End time using the rotary selector. Press the button to close the menu.
12