Antunes, AJ MS-150/155 owner manual Sho

Page 12

MIRACLE STEAMER

OPERATION (continued)

The amount of steam produced by your Miracle Steamer depends on the amount of water sprayed onto the steam generator.

Flooding of the generator may occur if the H2O setting is set too high. To prevent flooding, the Shot Interval Time (SHO) can be increased to allow more time for generator heat recovery. Adjustments should be made to both values to determine the optimum settings for your cooking needs.

To program the control, refer to Figure 6 and follow the procedure below:

1.Turn the unit on. The unit displays the factory programmed Total Cycle Time in minutes and seconds (Item A, Figure 6).

2.Press and release change the control from OPERATION to PROGRAM mode.

3.To change the Total Cycle Time in minutes, press ▲ or ▼ to change the time (Item B, Figure 6).

4.Press and release again, and press ▲ or ▼ to change the Total Cycle Time in seconds (Item C, Figure 6).

5.To change the SHO factory settings, make sure the control is in PROGRAM mode, then press and hold both ▲ and ▼ simultaneously for 1-2 seconds and then release. SHO will be displayed (Item D, Figure 6).

6.Press and release and then press ▲ or ▼ to change the SHO in seconds (Item E, Figure 6).

NOTE: 20 seconds is recommended.

7.Press and release again and press ▲ or ▼ to change the SHO in minutes (Item F, Figure 6).

NOTE: 00 minutes is recommended.

8.Press and release the Program button again and H2O will be displayed (Item G, Figure 6).

9.To change the H2O (Steam Shot time), press and release the Program button again to display the setting (Item H, Figure 6). Use ▲ or ▼ to increase or decrease the time.

NOTE: Recommended settings are:

MS-150/155/355 (0_80) 120 Volt units only

MS-250/255 (0_40) 120 Volt units only

MS-150/155/355 (1_00) 208-240 Volt units only

MS-250/255 (0_70) 208-240 Volt units only

10.Press either the Start/Stop, Single Shot, or Operate buttons to store the changes, exit the PROGRAM Mode and initiate the cooking cycle.

NOTE: The Start/Stop, Single Shot, or Operate but- tons may be pressed at any time during program- ming to store the changes and exit the PROGRAM Mode.

NOTE: If a change is not made within 5 seconds at any time during the programming process, all changes made up to that point are stored in memo- ry and the control reverts to the OPERATION Mode.

READY

 

READY

 

READY

 

READY

 

 

1500

 

15

 

 

 

00

 

SHO

UP

DOWN

PRGM START/STOP

UP

DOWN

PRGM START/STOP

UP

DOWN

PRGM START/STOP

UP

DOWN

PRGM START/STOP

A. Total Cycle Time

B. Total Cycle Minutes

C. Total Cycle Seconds

D. SHO Cycle

READY

 

READY

 

READY

 

READY

 

 

 

20

 

00

 

 

H20

 

 

 

UP

DOWN

PRGM START/STOP

UP

DOWN

PRGM START/STOP

UP DOWN

PRGM START/STOP

UP

DOWN

PRGM START/STOP

E. SHO Time in Seconds

F. SHO Time in Minutes

G. H2O Cycle

H. H2O Setting

Figure 6. Control Programming Sequence

12

P/N 1010699 Rev. M 12/06

Image 12
Contents Miracle Steamer Table of Contents Owner InformationImportant Safety Information Service/Technical AssistanceImportant Safety Information DeathSpecifications Electrical Cord & Plug ConfigurationsElectrical Ratings Model Designation MS-150XXSpecifications DimensionsInstallation UnpackingInstallation Model MS-150/155 & MS-355Plumbing Connecting Water Supply to MS-250/255 Models MS-250/255Operation General All Units Except MS-150/250 Mfg. #9100424, 432, 433Single Shot Timed CycleOperation ProgrammingSHO Hi-Limit Reset Button Fault CodesStatus Indicator LEDs Maintenance DailyMonthly Maintenance Cleaning Steam GeneratorMiracle Steamer Components Water Tank FILTER-MODELS MS-150/155 only Water Tank Filter-MS-150/155 OnlyTechnical Theory of Operation Troubleshooting Problem Possible Cause Corrective ActionTroubleshooting Miracle Steamer Replacement Parts Replacement Parts MS-150/155 Service CompartmentMS-250/255 Service Compartment MS-150/155/250/255 Item Part No Description QtyItem Part No Description MS-355 Service Compartment MS-355 Item Part No Description Qty Part Description Qty Wiring Diagrams Unless Otherwise SpecifiedLimited Warranty

MS-150/155 specifications

The Antunes AJ MS-150/155 series is a premium line of commercial food service equipment designed to meet the evolving needs of the fast-paced food industry. Known for its reliability and efficiency, this series includes innovative features that cater to both high-volume and diverse menu offerings.

One of the standout attributes of the Antunes AJ MS-150/155 is its advanced cooking technology. Equipped with a precise digital control system, it allows for accurate temperature settings and time management, ensuring consistent cooking results with every use. This precision is crucial for maintaining food quality and meeting safety standards, particularly in busy kitchen environments.

The AJ MS-150/155 series incorporates a user-friendly interface with intuitive controls, making it easy for staff to operate even during rush hours. The digital display provides real-time monitoring of cooking processes, reducing the risk of errors and enhancing operational efficiency. Moreover, the units feature programmable cooking cycles, allowing operators to save specific settings for different menu items, thereby streamlining the food preparation process.

Durability is a hallmark of the Antunes brand, and the AJ MS-150/155 does not disappoint. Constructed with high-grade stainless steel, these units are built to withstand the rigors of a commercial kitchen. The materials used not only contribute to the longevity of the equipment but also make cleaning and maintenance straightforward, ensuring that hygiene standards are upheld.

In terms of versatility, the AJ MS-150/155 is suitable for various cooking applications, including toasting, baking, and even grilling. This multifunctionality provides food service operators with the flexibility they need to cater to a broad range of menu options, from sandwiches and wraps to baked goods and snacks.

Energy efficiency is another notable feature of the AJ MS-150/155 series. Designed to minimize energy consumption without compromising performance, the equipment can help businesses reduce their energy costs and environmental impact.

In summary, the Antunes AJ MS-150/155 series stands out as a reliable solution for commercial kitchens seeking efficiency, durability, and versatility. With its advanced technology and user-friendly features, this equipment is poised to enhance food preparation processes and support culinary creativity, making it an invaluable asset for any food service operation.