Tools and Materials Needed
TOOLS NEEDED
Hammer | Hob Saw | Adjustabb Wrench |
Tape Measu re | Sbt Screwdriver | PhHHpsScrewdriver | %20 Screwdriver |
Wire Cutter | Wire Stripper | DrHI _- Z i | Level |
MATERIALS NEEDED
(Additional materiab may be required to comply with bcal codes,)
Ebctrbal Supply CaNe - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper conductors rated 75°C or higher,
|
| _> | Hot Water Supply Line - Minimum | 3/8" O,D, copper tubing or metal braided dishwasher | |
......" *s{_: | ....... supply line, |
|
| ||
5 | @}s | for hot water supply line (copper tubing/ | |||
|
|
| compression fitting, or braided hose), |
| |
|
|
| 90° elbow with 3/8" N,P,T, male threads on one leg, and sized to fit your water supply | ||
<c ......;. ," > | line (copper tubing/compression | fitting, | or braided hose) on the other leg, | ||
|
| :_;: | Teflon tape or other pipe thread compound to seal plumbing connections, | ||
UL listed conduit connector or strain relief,
2