Bosch Appliances SHV570, SHE990, SHE660, SHY660 Dishwasher PREPARATmON, Installing an Air Gap

Plumbing Preparation/Dishwasher Preparation

AirGap

Figure 8

PLUMBING PREPARATmON (continued)

Drain Ptumbing

Under Sink Drain Connection

ffthe dishwasher is to drain either directUyinto the househoUd drain pUumbingor through an air gap, install a y-branch taHpbce under the sink as shown in Figure 7,

installing an Air Gap

if local ordinances require an air gap, as shown in Figure 8, install it according to the manufacturer's instructions,

Disposer

Make sure to remove the disposer's dishwasher drain connection plug before connecting the dishwasher drain hose, See Figure 9,

DISHWASHER PREPARATmON

Dishwasher preparation involves four tasks:

Installing the Mounting Brackets

Installing the 90° elbow fitting

Junction Box Preparation

installing the Countertop Mounting Brackets

			Before installing the supplied countertop mounting
			brackets, decide which method of securing the
			dishwasher into its enclosure wilt be used. Once
Figure	9		the mounting		brackets	are installed on the dish-
			washer, removing them is difficult and will damage
Step	I		the mounting brackets and the dishwasher.
			The dishwasher can be secured into its enclosure in two
			ways:
			1 Top Mount is used for countertops made of wood or
			other materials that can easily drilled, Orient the
	Step	2	mounting brackets as shown in Figure 10, and
			position the two small tabs on the mounting brackets
			over the two slots on the dishwasher's front corners,
			Push the mounting brackets down firmly to insert the
			tabs	into the	slots,
			2 Side Mount is used for countertops made of marne,
			granite, or other very hard materials that cannot be
			easily drilled, Bend the mounting brackets along the
Figure	10		small hobs and in the same direction as the two small
			tabs, Orient the mounting brackets as shown in Figure
Step	I		11, and position the two small tabs on the mounting
			brackets over the two slots on the dishwasher's front
			corners, Push the mounting brackets down firmly to
			insert the tabs into the slots,
					Tip	Over Hazard
			To avoid a tip over hazard, do not use the
			dishwasher until it is completeJy installed. When
			opening the door on an uninstaHed dishwasher,
			carefully open the door while supporting				the rear
			of the	unit. Failure to fottow this warning			can
Figure	11		resuff	in serious injury.