Operating Instructions, Lighting main burner

5.Turn the burner knobs to "HI". If the burner does not ignite, promptly open the pilot valve more. If the pilot flame appears larger than necessary, turn it down and reset burner ignition. The pilot flame should be as small as possible but large enough to guarantee reliable ignition of the burners when the knobs are turned to "HI".

Lighting main burner

To light burner, turn knob to “max.” Then back off to the desired flame level. The range of adjustment is virtually infinite between high and off. (At small flame, there is a preset low).

Main burner air supply:

1.For efficient burner operation, a proper balance of gas volume and primary air supply must be maintained which will result in complete combustion. Insufficient air supply results in a yellow streaming flame. Primary air supply is controlled by an air shutter on the front of the burner.

2.Loosen the screws on the front of the burner and adjust the air shutter to just eliminate the yellow tips of the burner flame. Lock the air shutter in place by tightening the screws.

European Community

If adjustment becomes necessary in the field, it should be done by a factory authorized and trained technician who should seal the screw after the adjustment to safeguard against unauthorized tampering by the end user.

All burners are lit from constantly burning pilots. Turning the thermostat to the desired temperature is all that is required to put the unit in service.

Do not permit fans to blow directly at the unit. Wherever possible, avoid open windows next to the units' sides or back. Avoid wall type fans which create air cross-currents within a room.

It is also necessary that sufficient air should be allowed to enter the room to compensate for the amount of air removed by any ventilating system. Otherwise, a subnormal atmospheric pressure will occur, which will effect operation and cause undesirable working conditions.

A properly designed and installed hood will act as the heart of the ventilating system for the room or area in which the unit is installed and will leave the unit independent of changing draft conditions.

All valves must be checked and lubricated periodically. This must be done by an authorized service representative in your area.

OPERATING INSTRUCTIONS

Season Griddle:

Heat to low temperature (300 - 350 F/150-180C) and pour on a small amount of cooking oil, about one ounce (30cc) per square foot of surface. Spread the oil over the entire griddle surface with a cloth to create a thin film. Wipe off any excess oil with a cloth. Repeat this procedure 2 to 3 times until the griddle has a slick, mirror-like surface.

Operation:

Turn the burners on about 15-20 minutes before cooking for preheating. Set the knobs to the desired flame height or temperature. Each valve will control the gas flow to the burner to bring that area of the plate up to the set temperature. If different temperature settings are to be used, adjoining areas should be set at progressively higher temperatures using the lowest temperatures on the outside burners. A uniform and systematic approach to the loading of the griddle will produce the most consistent product results.

GGM-24H, GGT-48H, GGM-18H, GGM-48H, GGT-18H specifications

APW Wyott is a well-known manufacturer in the foodservice industry, particularly recognized for its high-quality countertop cooking equipment. The GGM-24H, GGT-48H, GGT-36H, GGM-18H, and GGM-48H models are part of the brand's lineup, each offering unique features tailored to meet various foodservice needs.

The GGM-24H is designed for versatility and efficiency. It features a high-quality stainless steel construction, ensuring durability and ease of cleaning. This model is equipped with grill plates that provide even heat distribution, allowing for consistent cooking results. Its compact size makes it suitable for establishments with limited counter space, while still providing ample cooking surface for various menu items.

In contrast, the GGT-48H and GGT-36H models are larger and designed for higher volume food preparation. Both models come with an adjustable temperature control that allows operators to cook at precise temperatures. The GGT-48H offers a substantial cooking surface, making it ideal for busy kitchens that need to prepare large quantities quickly. The GGT-36H is slightly smaller but still offers a generous cooking area, focusing on efficiency and performance.

The GGM-18H is another excellent option, particularly for smaller operations or cafes. Like its counterparts, it features a robust stainless steel design for longevity and ease of maintenance. Its compact footprint does not sacrifice cooking capacity, making it a favorite for operators looking for a balance between performance and space-saving design.

Lastly, the GGM-48H stands out with its expansive cooking surface. This model is designed for high-volume foodservice environments, allowing chefs to prepare multiple items at once. It comes with precise temperature control settings and ensures even cooking, making it an essential tool for busy kitchens where speed and quality are paramount.

All models are equipped with advanced heating technologies that promote quick recovery times and energy efficiency, allowing operators to save on energy costs while maximizing productivity. The seamless design and user-friendly controls make these units easy to operate and maintain, ensuring they meet the demands of any fast-paced commercial kitchen.

In summary, the APW Wyott GGM-24H, GGT-48H, GGT-36H, GGM-18H, and GGM-48H models are designed with the commercial chef in mind, providing high performance, durability, and ease of use. These units are equipped to handle a variety of cooking tasks, making them essential assets in the foodservice industry.