Lincoln 1600 GAS VALVE, Dual Safety Replacement, Temperature Regulating Valve Replacement

Page 13

GAS VALVE, DUAL SAFETY - REPLACEMENT

A.Remove appropriate control box cover.

B.Remove incoming gas line.

C.Remove screws from incoming nipple mounting bracket.

D.Remove incoming nipple.

E.Remove bypass tube assy.

F.Disconnect pipe union.

G.Disconnect wiring from control valve (four [4] push on connectors), make note of wire numbers and location for reinstallation.

H.Remove gas piping from old valve and install on new one.

I.Reassemble in reverse order and check system operation. Set manifold pressure on gas valve. Pressure should be 3.5 in W.C. Nat., 10 in W.C. L.P.

NOTE: Check all gas line fittings for leaks, check and adjust manifold pressure.

MANIFOLD ADJUSTMENT

SCREW LOCATED UNDER

COVER SCREW

FRONT VIEW

PILOT

LINE

CONNECTION

MANIFOLD PRESSURE ADJUSTMENT CONNECTION

MANIFOLD ADJUSTMENT SCREW LOCATED UNDER COVER SCREW

TOP VIEW

TEMPERATURE REGULATING VALVE - REPLACEMENT

A.Remove appropriate control box cover

B.Remove bypass tube assy.

C.Remove four (4) nuts from burner orifice bracket.

D.Disconnect pipe union.

E.Disconnect two (2) wires from valve and remove assembly.

F.Remove gas piping from old valve and install on new one.

G.Reassemble in reverse order and check system operation. NOTE: Check all gas line fittings for leaks and insure valve gas flow is in proper direction .

MAIN ORIFICE - REPLACEMENT

A.Remove appropriate control box cover.

B.Remove bypass tube assembly.

C.Remove four (4) nuts from burner orifice bracket.

D.Disconnect pipe union.

Low Profile – 1600-000-A Advantage Series Service Manual – Domestic

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Impinger Conveyor Ovens Table of Contents Sequence of Operations / 1600-000-A, 1601-000-A GAS Ovens Troubleshooting GuidePage With Power on and Thermocouple Leads Page Page Page Schematic / 1600-000-A, 1601-000-A REMOVAL, Installation & Adjustments Hall Effect Sensor Replacement Conveyor Drive Motor ReplacementFuseholder Replacement Conveyor Control Board CalibrationTemperature Regulating Valve Replacement GAS VALVE, Dual Safety ReplacementMain Orifice Replacement ON-OFF Switch Power Replacement Temperature Control Potentiometer ReplacementDual Temperature Display Replacement Calibrate TemperatureTHERMOSTAT, Cooling FAN Replacement Relay ReplacementElectronic Temperature Control Replacement Temperature Setting for NEW Temperature Control BoardMain FAN Motor Replacement Cooling FAN Motor ReplacementThermocouple Type J Replacement BEARING, Conveyor Replacement Letter Description Parts / General 1600-000-A Advantage SeriesBlow UP / General 1600-000-A Advantage Series Parts / Control BOX, Right 1600-000-A, 1601-000-A Blow UP / Control BOX, Right 1600-000-A, 1601-000-A Parts / Control BOX, Left 1600-000-A, 1601-000-A Blow UP / Control BOX, Left 1600-000-A, 1601-000-A Parts / Oven Back 1600-000-A Series Blow UP / Oven Back 1600-000-A Series Parts / Conveyor 1600-000-A Series Blow UP / Conveyor 1600-000-A Series

1600 specifications

The Lincoln 1600, a remarkable offering from Lincoln Electric, stands as a testament to the company's commitment to excellence in welding technology. Designed for professionals and enthusiasts alike, this versatile welding machine boasts a range of features that cater to diverse welding applications.

One of the standout characteristics of the Lincoln 1600 is its robust construction. Built with durability in mind, the machine is engineered to withstand demanding environments, making it a reliable choice for industrial, commercial, and DIY projects. Its compact design enhances portability, allowing welders to easily transport the unit to different job sites without compromising performance.

Equipped with advanced inverter technology, the Lincoln 1600 offers efficient power usage while delivering consistent welding output. The inverter technology not only enhances energy efficiency but also allows for a wider input voltage range, ensuring optimal performance regardless of the power supply available.

Another key feature is its user-friendly interface. The Lincoln 1600 comes with intuitive controls that simplify the setup process, making it accessible for both beginners and experienced welders. The clear display provides real-time feedback on voltage and amperage settings, allowing users to fine-tune their welding parameters for precise results.

The machine supports multiple welding processes, including MIG, TIG, and stick welding. This versatility makes it suitable for a variety of materials, including steel, aluminum, and more, expanding its range of applications. Furthermore, the Lincoln 1600 is compatible with a selection of welding wires and electrodes, giving users the flexibility to choose the best consumables for their projects.

Safety features are also prominent in the Lincoln 1600. The machine is equipped with overcurrent protection and thermal overload shutdown, protecting both the welder and the equipment from damage due to excessive heat or electrical load. These safety measures ensure that users can work confidently, knowing they are safeguarded during operation.

In conclusion, the Lincoln 1600 combines robust construction, advanced technology, and user-centric design to deliver a top-tier welding experience. Its adaptability across multiple welding processes and materials, complemented by essential safety features, positions it as an invaluable tool for anyone serious about welding. Whether for professional or personal use, the Lincoln 1600 is a machine that promises reliability and performance, making it a worthy addition to any welder's arsenal.
Top Page Image Contents