Installation and
Operation
This section describes the front and rear panel features of the six SCP 104/226 models and provides procedures for installing and operating the control panels. Topics that are covered include:
•• UL Requirements
•• Installation Overview
•• Installing or Replacing Button Labels
•• Rear Panel Features and Connections
•• SCP and System 5 IP Button Functions
•• Mounting the SCP
•• Front Panel Features
•• Resetting
•• Updating the Firmware
UL Requirements
The Underwriters Laboratories (UL\⤀ requirements listed below pertain to the safe installation and operation of the SCP 104/226 into a wall or furniture.
•• Do not use the SCP near water or expose it to liquids.
WARNING: Risk of fire or electric shock. Do not expose
this apparatus to rain or moisture.
•• Clean the SCP only with a dry cloth.
•• Do not install the SCP near any heat source, such as a radiator, heat register, stove, or other apparatus that produces heat (including amplifiers\⤀.
•• Unplug the SCP during lightning and thunderstorms or when it will be unused for long periods.
•• For the installation to meet UL requirements and to comply with National Electrical Code (NEC\⤀, the SCP must be installed in a UL approved junction box. The end user or installer must furnish the junction box; it is not provided by Extron.
SCP 104 and SCP 226 • Installation and Operation | 5 |