Using the Command and Response Tables
The command and response tables on the following pages list valid command ASCII codes, the SCP responses to the host, and a description of the command function or the results of executing the command.
The ASCII to hexadecimal conversion table below is for use with the command and response tables.
ASCII to Hex Conversion Table |
Space |
• |
Symbol Definitions
] = CR/LF (carriage return/line feed\⤀ (hex 0D 0A\⤀
}= Soft carriage return (no line feed\⤀ E = Escape key
• = Space
X! = Firmware number
NOTES: • Unless otherwise indicated, commands are not case sensitive.
• Although most of the ASCII commands are not case sensitive, each uppercase and lowercase letter has its own hex code. For example, the hex equivalent for uppercase Q is 51; the code for lowercase q is 71. The hex codes for both versions of the same letter can be used interchangeably unless otherwise stated.
In the SIS command and response tables, only the lowercase version of the command and its hex equivalent are shown.
33SCP 104 and SCP 226 • Remote Communication