Extron electronic SCP 104, SCP 226 manual Open Window for Firmware

Page 36

Figure 33. Open Window for Firmware

12.In the Open window, locate and double-click on the firmware filename (it has a .bin extension\⤀.

NOTE: The firmware update file must have a filename

extension of .bin. If the file does not have that extension, the unit does not function properly.

The path to the firmware file is displayed in the Path field of the New Firmware File (Optional\⤀ section. (By default, the firmware file is located at C:\Program Files\Extron\

Firmware\SCP_104_226\01.)

13.Click Add. The Firmware Loader window opens, with information about your selected firmware file displayed in the Devices field.

14.Click Begin to start the firmware uploading process.

A prompt window opens, advising you not to start any programs while the firmware is uploading. Click OK to continue.

Figure 34. Firmware Loader Screen with Update Complete

15.When the firmware update is finished, Completed appears above the Total Progress bar. In the Devices section, the Progress column displays 100%, and the Status column displays Completed. Close the Firmware Loader window.

30SCP 104 and SCP 226 • Installation and Operation

Image 36

Contents

User Guide Precautions 安全须知中文 FCC Class a NoticeNotifications Conventions Used in this GuideContents Vi SCP 104 and SCP 226 Contents About this Guide About the SCP 104 and SCP 226 System Control PanelsFeatures Application Diagrams ExtronExtron System 5 IP Connection Diagram for an SCP Installation Operation UL RequirementsInstallation Overview Installing or Replacing Button LabelsReplacing a Button Label Rear Panel Features and Connections SCP 104 Rear PanelSCP power and control connectors These two female Two SCPs. For exampleWiring the RS-232 Port Connecting a Host to the SCPSW12 on Wiring the Power Connector Optional Wiring the Power ConnectorConnecting the SCP 104 to the MLC 104 IP Plus SCP 104 to MLC 104 IP PlusSCP 226 to MLC 226 IP SCP 104 to MLC 104 IP Plus with IRCM-DV+ modulesSCP 226 to MLC 226 IP with IRCM-DV+ control modules IRCM-DV+SCP to system switcher Two SCP 226s to system switcher and two control modules Address 3SCP and System 5 IP Button Functions Mounting the SCP Mounting OptionsMounting to an Electrical Box In-wall or in-furniture mounting optionsMounting to a Lectern SCP 226 L Mounting an SCP 104 in a Two-gang Electrical BoxFront Panel Features SCP 104 Front Panel Extron SCP 226 L Front Panel Using the IR 402 with an SCP Resetting Volume Indicator LEDsUpdating the Firmware Obtaining the Firmware Loader ProgramLoading Firmware to the SCP Download Link for Firmware LoaderFirmware Loader Add Device Screen Open Window for Firmware Setting Up RS-232 Communication Communications Between the Host and the SCPBaud rate Data bits Parity None Stop Bits Flow Control None Using SIS Commands Error ResponsesSCP-initiated Messages Using the Command and Response Tables Symbol DefinitionsCommand and Response Table for SIS Commands Command Ascii Command Hex Response Additional DescriptionInformation Requests Volume Relative Function Reset to Default Settings Upload FirmwareSpecial Function SIS Commands Command Ascii Command Response ? and Y? Values Switch ResponsesIRCM/RCM Enablement Additional DescriptionsVolume LED Control Front Panel Button LED ControlUsing the Switch and Button Table Switch Number LocationsFront panel switch locations Switch Locations on the SCPIR 402 switch locations Control modules switch locationsSwitch Numbering for Control Modules IRCMs and RCMs Switch and Button Table Switch ButtonPart Numbers ModelsIncluded Parts Models Part NumbersAccessories Recommended CablesCutout Templates SCP 104 Cutout TemplateSCP 104 AAP Cutout Template Surface CUT-OUT Area For Furniture MountSCP 226 Cutout Template SCP 226 AAP Cutout Template For Furniture Mount SCP 226 L Cutout TemplateSCP 104 and SCP 226 Reference Information Extron Warranty USA, Canada, South America Central America JapanExtron Europe Extron India

Related manuals

Manual 60 pages 50.44 Kb