8.Start the Firmware Loader program by clicking the Firmware Loader icon on your computer Start menu. The Firmware Loader Add Device screen appears.
Figure 31. Firmware Loader Add Device Screen
9.From the four
•• Device Name: SCP 104 or SCP 226
•• Connection Method:
•• Com Port: Select the Com port through which your SCP will communicate with your PC via
•• Baud Rate: 9600
10.Click Connect. When the computer connects to the SCP, the following message appears in the Connected Device field:
Figure 32. Successful Connection Message
11.In the New Firmware File (Optional\⤀ section of the Add Device screen, click Browse.
29SCP 104 and SCP 226 • Installation and Operation