Bunn LCR-3 service manual BibEMPTY Lockout, Hrs +, Saver Tank Temp No Exit Action

PROGRAMMING (Continued)

LCD DISPLAY

BibEMPTY LOCKOUT

NO EXIT YES

BREW LOCKOUT ?

NO EXIT YES

ENERGY SAVER MODE

NO EXIT YES

E-SAVER IDLE TIME

(-) 4 HRS (+)

E-SAVER TANK TEMP

NO EXIT 140

ACTION

Select (YES) to enable

Select (YES) to enable

Select (ON) to enable

Use the (+) or (-) buttons to adjust the Idle Time

Select OFF or 140° F (60°C)

DESCRIPTION

Select YES to Lockout dispensing until the BIB is replaced and the pump has been Primed. Default is NO.

Select YES to Lockout dispensing until the hot water tank is at READY Temp. Default is NO.

Select ON to enable Energy Saver Mode. Default is OFF.

Enter the amount of inactive time before the dispenser goes into Energy Saver Mode. Default is 4 hrs. Maximum is 24 hrs.

Choose OFF to turn the tank heaters off completely or 140°F (60°C) to hold hot water at 140°F (60°C) during E-Saver Mode. Default is 140°F (60°C).

14 41129 071409