Bunn ITB, TWIN manual Setting Drip Time, Setting Sweet Meter Optional on Itcb, Procedure

Page 15

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

34.When finished, press the other batch size and repeat step # 33.

35.When finished setting both batch sizes, press and release DONE.

36.The display should now read LAST ON:. Adjust the LAST ON TIME using (-)or (+). If PREINFUSION is desired, set the LAST ON TIME to PreI.

37.When finished, press the other batch size and repeat step # 36.

38.When finished setting both batch sizes, press and release DONE.

39.The display will show the three times just entered. Press and release each batch size to display the set- tings for that batch. If the 1ST ON TIME is set to OFF, the display will read PULSE BREW DISABLED. After a 5 second delay, the display will read 2 BATCHES

DONE?

40.If both the pulse brew settings for both batch sizes are not correct, press and release NO to return to the 1ST ON TIME setup screen and repeat steps 24 through 39.

41.If both batch sizes are correct, press YES. The display should now read DRIP TIME.

Setting DRIP TIME:

NOTE: Drip time also controls the solenoid on time for models with optional funnel locks.

42.The display should now read DRIP TIME, along with either the word OFF or a time showing. A batch light will also be blinking.

43.Using (-)or (+), set the amount of time from when the brew spray ends to when the funnel is emptied of hot liquid.

44.When finished, press the other batch size and repeat step #43.

45.When finished setting both batch sizes, press and release DONE. The display should read 2 BATCHES

DONE?

46.Select YES. The screen should show the name of the recipe being programmed (modified) along with SETUP COMPLETE (except for ITCB w/Sweet meter, step # 47).

Setting SWEET METER: Optional on ITCB

This function allows the operator to adjust the amount of sweetener added to the dilution water. The solenoid is pulsed on/off for the duration of the dilution cycle. Setting #1 will produce the least amount of sweetener (weakest) and (#14) being the most (strongest).

Procedure:

47.The display should now read "SWEETNER"

48.Press (-) to decrease the amount, or (+) to increase. (Range: 1 - 14)

49.When finished, press and release the right hidden switch, or press and release the "ENABLE BREW ON/OFF" switch to return to the main screen.

Page 15

41581.2 091609

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Phone 217 529-6601 FAX 217 Post Office BOX SPRINGFIELD, IllinoisBUNN-O-MATIC Commercial Product Warranty Contents ITBItcb Programming the Brewer ICBProgramming the Brewer ICB TwinProgramming Functions Level ITBItcb Set Recipes Temps Itcb ITBProcedure to program the coffee name Using a Recipe Card to load recipesProcedure to program the AD Procedure for setting Brew Lockout Procedure for setting LanguageSET Language ICB Default Recipe Chart ICBDefault Assignments UnitsBy Pressing SHOW, VIEW/MODIFY Items ICBSweet Meter ITB/ITCB with Factory SweetenerDONE? When finished, press the other batch size and repeat step #Setting Pulse Brew Easy Pulse Brew Setting Pulse Brew/PreInfusion ManualSetting Drip Time Setting Sweet Meter Optional on ItcbProcedure ICB ITB/ITCB Overview only Some Screens OmittedNo Name Coffee Itcb Procedure to select switch recipesProcedure to disable a Brew Switch Select Done to disable that brew switchICB Procedure for Setting the RecipeSET NEW Recipe Coffee only SET NEW Coffee ItemsReady Degree Enable ADSSET Temp ICB Master Temp Itcb Main ScreenFrom the NEW AD? screen, select Card Enable SanitationEnable Sanitation Procedure for enabling sanitation Range 0.0 to 72.0 hrsHot Tea 0.5 to 8.0 hrs Enable Energy SaverEnable Fresh Timer Able FreshtimerSpray OZ/M Procedure to set the sprayhead flow rateProcedure to adjust the bypass flow rate setting Procedure to adjust the dilution flow rate settingCalibrate Flow Procedure to calibrate the sprayhead flow rateProcedure to calibrate the bypass flow rate ICB Procedure to calibrate the dilution flow rate ItcbICB Series Programming Functions Level 2 Procedure to view/reset the brew counters Brew CountersITB/ITCB YES SET Recipe Temps Itcb onlyAsset Number Service NumberService Tools Factory DefaultsTroubleshooting Remedy TroubleshootingProblem Probable CauseProblem Probable Cause Remedy Long Ting Obstructions. Clear or replace Refill valveIf the left three digit number Problem Probable Cause Control Board ON/OFF SwitchAutomatic refill will not operate or Water flows into tank continuously Refill valve TingTo it is secure Heating Time TOO Long As required Recipe settingsNo bypass water Bypass valve Lime buildup Been set for the current recipe90 psi 138 and 620 kPa Brew volume adjustmentInconsistent beverage level Server/dispenserVibrate during operation Tank heaters Remove and clean lime off tank HeatersFor proper extraction SolenoidsBe used for proper extraction Water temperatureWeak beverage Type of paper filter Coffee
Related manuals
Manual 36 pages 5.47 Kb

ITB, TWIN specifications

The Bunn TWIN,ITB is a remarkable coffee brewing system designed for commercial use, aimed at establishments that require a high volume of coffee while maintaining superior quality. This innovative brewer stands out through its dual brewing capability, allowing users to brew two different types of coffee simultaneously. This feature is particularly beneficial for cafes, restaurants, and other food service locations where diverse customer preferences must be met efficiently.

One of the main features of the Bunn TWIN,ITB is its advanced brewing technology. The system utilizes Bunn's patented brewing process, ensuring optimal coffee extraction and flavor profile every time. It employs a digitally controlled brew timer and state-of-the-art heating elements, providing precise temperature control essential for achieving the ideal brew. This technology allows for consistent results, ensuring that each cup meets the high standards expected in a commercial setting.

The design of the TWIN,ITB is user-friendly and intuitive. It includes an easy-to-read LED display that simplifies programming and monitoring of the brewing process. This streamlined interface enables baristas to adjust settings quickly and efficiently, significantly reducing wait times for customers. Additionally, the unit's low-profile design enables it to fit seamlessly into various kitchen layouts and countertops, optimizing valuable space.

Durability and reliability are at the forefront of the Bunn TWIN,ITB's construction. Built with high-quality materials, the brewer is designed to withstand the rigors of intense daily use. Its stainless-steel finish not only provides a sleek and professional appearance but also makes it easy to clean and maintain, ensuring longevity and excellent performance throughout its lifespan.

Furthermore, the TWIN,ITB features an impressive water capacity with a built-in hot water tank. This allows users to brew large batches of coffee without interruption and offers instant hot water for tea, soups, or other hot beverages. The efficient brewing system utilizes pre-infusion technology, which saturates the coffee grounds before extraction, enhancing the overall flavor and aroma of the brewed coffee.

In summary, the Bunn TWIN,ITB is an exceptional choice for any commercial establishment looking to provide high-quality coffee efficiently. Its dual brewing capabilities, advanced technologies, user-friendly design, durability, and additional features make it a valuable addition to any coffee service operation. Whether busy mornings or afternoon rushes, this brewer ensures that every cup of coffee meets the high standards of taste and quality that customers expect.
Top Page Image Contents